Skip Headers
Oracle® Database JDBC Developer's Guide and Reference
10g Release 2 (10.2)

Part Number B14355-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

26 OCI Connection Pooling

The Java Database Connectivity (JDBC) Oracle Call Interface (OCI) driver connection pooling functionality is part of the JDBC client. This functionality is provided by the OracleOCIConnectionPool class.

A JDBC application can have multiple pools at the same time. Multiple pools can correspond to multiple application servers or pools to different data sources. The connection pooling provided by the JDBC OCI driver enables applications to have multiple logical connections, all using a small set of physical connections. Each call on a logical connection gets routed on to the physical connection that is available at the time of call.

This chapter contains the following sections:

Note:

Use OCI connection pooling if you need session multiplexing. Otherwise, Oracle recommends using the Implicit Connection Cache functionality.

OCI Driver Connection Pooling: Background

The Oracle JDBC OCI driver provides several transaction monitor capabilities, such as the fine-grained management of Oracle sessions and connections. It is possible for a high-end application server or transaction monitor to multiplex several sessions over fewer physical connections on a call-level basis, thereby achieving a high degree of scalability by pooling of connections and back-end Oracle server processes.

The connection pooling provided by the OracleOCIConnectionPool interface simplifies the session/connection separation interface hiding the management of the physical connection pool. The Oracle sessions are the OracleOCIConnection objects obtained from OracleOCIConnectionPool. The connection pool itself is normally configured with a much smaller shared pool of physical connections, translating to a back-end server pool containing an identical number of dedicated server processes. Note that many more Oracle sessions can be multiplexed over this pool of fewer shared connections and back-end Oracle processes.

OCI Driver Connection Pooling and Shared Servers Compared

In some ways, what OCI driver connection pooling offers on the middle tier is similar to what shared server processes offer on the back-end. OCI driver connection pooling makes a dedicated server instance behave as an shared instance by managing the session multiplexing logic on the middle tier. Therefore, the pooling of dedicated server processes and incoming connections into the dedicated server processes is controlled by the OCI connection pool on the middle tier.

The main difference between OCI connection pooling and shared servers is that in case of shared servers, the connection from the client is normally to a dispatcher in the database instance. The dispatcher is responsible for directing the client request to an appropriate shared server. On the other hand, the physical connection from the OCI connection pool is established directly from the middle tier to the Oracle dedicated server process in the back-end server pool.

Note that OCI connection pool is mainly beneficial only if the middle tier is multithreaded. Each thread could maintain a session to the database. The actual connections to the database are maintained by OracleOCIConnectionPool, and these connections, including the pool of dedicated database server processes, are shared among all the threads in the middle tier.

Defining an OCI Connection Pool

An OCI connection pool is created at the beginning of the application. Creating connections from a pool is quite similar to creating connections using the OracleDataSource class.

The oracle.jdbc.pool.OracleOCIConnectionPool class, which extends the OracleDataSource class, is used to create OCI connection pools. From an OracleOCIConnectionPool instance, you can obtain logical connection objects. These connection objects are of the OracleOCIConnection class type. This class implements the OracleConnection interface. The Statement objects you create from the OracleOCIConnection instance have the same fields and methods as OracleStatement objects you create from OracleConnection instances.

The following code shows header information for the OracleOCIConnectionPool class:

/* 
   * @param us  ConnectionPool user-id. 
   * @param p   ConnectionPool password 
   * @param name  logical name of the pool. This needs to be one in the 
   *                   tnsnames.ora configuration file. 
     @param config (optional)  Properties of the pool, if the default does not 
                suffice. Default connection configuration is min =1, max=1,
                incr=0 
                  Please refer setPoolConfig for property names. 

                 Since this is optional, pass null if the default configuration 
                 suffices. 

   * @return 
   * 
   * Notes: Choose a userid and password that can act as proxy for the users 
   *        in the getProxyConnection() method. 

            If config is null, then the following default values will take
            effect 
            CONNPOOL_MIN_LIMIT = 1 
            CONNPOOL_MAX_LIMIT = 1 
            CONNPOOL_INCREMENT = 0 

*/ 

public synchronized OracleOCIConnectionPool 
  (String       user,    String   password,  String name, Properties config) 
  throws SQLException 

/* 
 * This will use the user-id, password and connection pool name values set 
   LATER using the methods setUser, setPassword, setConnectionPoolName. 

 * @return 
 * 
 * Notes: 

     No OracleOCIConnection objects can be created on 
     this class unless the methods setUser, setPassword, setPoolConfig 
     are invoked. 
     When invoking the setUser, setPassword later, choose a userid and 
     password that can act as proxy for the users 
 *   in the getProxyConnection() method. 
 */ 
  public synchronized OracleOCIConnectionPool () 
    throws SQLException 

Importing the oracle.jdbc.pool and oracle.jdbc.oci Packages

Before you create an OCI connection pool, import the following to have Oracle OCI connection pooling functionality:

import oracle.jdbc.pool.*;
import oracle.jdbc.oci.*;

Creating an OCI Connection Pool

The following code show how you create an instance of the OracleOCIConnectionPool class called cpool:

OracleOCIConnectionPool cpool = new OracleOCIConnectionPool
    ("SCOTT", "TIGER", "jdbc:oracle:oci:@(description=(address=(host=
    myhost)(protocol=tcp)(port=1521))(connect_data=(INSTANCE_NAME=orcl)))",
    poolConfig);

poolConfig is a set of properties which specify the connection pool. If poolConfig is null, then the default values are used. For example, consider the following:

As an alternative to the constructor call, you can create an instance of the OracleOCIConnectionPool class using individual methods to specify the user, password, and connection string.

OracleOCIConnectionPool cpool = new OracleOCIConnectionPool ( );
cpool.setUser("SCOTT");
cpool.setPassword("TIGER");
cpool.setURL("jdbc:oracle:oci:@(description=(address=(host=
    myhost)(protocol=tcp)(port=1521))(connect_data=(INSTANCE_NAME=orcl)))");
cpool.setPoolConfig(poolConfig);  // In case you want to specify a different 
                                  // configuration other than the default 
                                  // values.

Setting the OCI Connection Pool Parameters

The connection pool configuration is determined by the following OracleOCIConnectionPool class attributes:

You can configure all of these attributes dynamically. Therefore, an application has the flexibility of reading the current load, that is number of open connections and number of busy connections, and adjusting these attributes appropriately, using the setPoolConfig method.

Note:

The default values for the CONNPOOL_MIN_LIMIT, CONNPOOL_MAX_LIMIT, and CONNPOOL_INCREMENT parameters are 1, 1, and 0, respectively.

The setPoolConfig method is used to configure OCI connection pool properties. The following is a typical example of how the OracleOCIConnectionPool class attributes can be set:

...
java.util.Properties p  = new java.util.Properties( );
p.put (OracleOCIConnectionPool.CONNPOOL_MIN_LIMIT, "1");
p.put (OracleOCIConnectionPool.CONNPOOL_MAX_LIMIT, "5");
p.put (OracleOCIConnectionPool.CONNPOOL_INCREMENT, "2");
p.put (OracleOCIConnectionPool.CONNPOOL_TIMEOUT, "10");
p.put (OracleOCIConnectionPool.CONNPOOL_NOWAIT, "true");
cpool.setPoolConfig(p);
...

Observe the following rules when setting these attributes:

Checking the OCI Connection Pool Status

To check the status of the connection pool, use the following methods from the OracleOCIConnectionPool class:

Connecting to an OCI Connection Pool

The OracleOCIConnectionPool class, through a getConnection method call, creates an instance of the OracleOCIConnection class. This instance represents a connection.

Because the OracleOCIConnection class extends OracleConnection class, it has the functionality of this class too. Close the OracleOCIConnection objects once the user session is over, otherwise, they are closed when the pool instance is closed.

There are two ways of calling getConnection:

The following code shows the signatures of the overloaded getConnection method:

public synchronized OracleConnection getConnection( ) 
                    throws SQLException 

/* 
 * For getting a connection to the database. 
 * 
 * @param us  Connection user-id 
 * @param p   Connection password 
 * @return     connection object 
 */ 
public synchronized OracleConnection getConnection(String us, String p) 
throws SQLException 

As an enhancement to OracleConnection, the following new method is added into OracleOCIConnection as a way to change password for the user:

void passwordChange (String user, String oldPassword, String newPassword) 

Sample Code for OCI Connection Pooling

The following code illustrates the use of OCI connection pooling in a sample application:

import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Properties;
import oracle.jdbc.OracleDriver;
import oracle.jdbc.pool.OracleOCIConnectionPool;
 
public class conPoolAppl extends Thread
{
  public static final String query = "SELECT object_name FROM all_objects WHERE rownum < 300";
  static public void main(String args[]) throws SQLException
  {
    int _maxCount = 10;
    Connection []conn = new Connection[_maxCount];
    try
    {
      DriverManager.registerDriver(new OracleDriver());
 
      String s = null;   //System.getProperty ("JDBC_URL");
 
      //String url = ( s == null ? "jdbc:oracle:oci8:@orcl" : s);
      String url = "jdbc:oracle:oci8:@orcl.rmmslang.com";
 
      OracleOCIConnectionPool cpool = new OracleOCIConnectionPool("scott", "tiger", url, null);
 
      // Print out the default configuration for the OracleOCIConnectionPool
      System.out.println ("-- The default configuration for the OracleOCIConnectionPool --");
      displayPoolConfig(cpool);
 
      //Set up the initial pool configuration
      Properties p1  = new Properties();
      p1.put (OracleOCIConnectionPool.CONNPOOL_MIN_LIMIT, Integer.toString(1));
      p1.put (OracleOCIConnectionPool.CONNPOOL_MAX_LIMIT, Integer.toString(_maxCount));
      p1.put (OracleOCIConnectionPool.CONNPOOL_INCREMENT, Integer.toString(1));
  
      // Enable the initial configuration
      cpool.setPoolConfig(p1);
 
      Thread []t = new Thread[_maxCount];
      for (int i = 0; i < _maxCount; ++i)
      {
        conn[i] = cpool.getConnection("scott", "tiger");
        if ( conn[i] == null )
        {
          System.out.println("Unable to create connection.");
          return;
        }
        t[i] = new conPoolAppl (i, conn[i]);
        t[i].start ();
        //displayPoolConfig(cpool);
      }
 
      ((conPoolAppl)t[0]).startAllThreads ();
      try 
      { 
        Thread.sleep (200); 
      } 
      catch (Exception ea) {}
 
      displayPoolConfig(cpool);
      for (int i = 0; i < _maxCount; ++i)
        t[i].join ();
    }
    catch(Exception ex)
    {
      System.out.println("Error: " + ex);
      ex.printStackTrace ();
      return;
    } 
    finally
    {
      for (int i = 0; i < _maxCount; ++i)
        if (conn[i] != null)
        conn[i].close ();
    }
  } //end of main
 
  private Connection m_conn;
  private static boolean m_startThread = false;
  private int m_threadId;
  
  public conPoolAppl (int i, Connection conn)
  {
    m_threadId = i;
    m_conn = conn;
  }
 
  public void startAllThreads ()
  {
    m_startThread = true;
  }
 
  public void run ()
  {
    while (!m_startThread) Thread.yield ();
    try
    {
      doQuery (m_conn);
    }
    catch (SQLException ea)
    {
      System.out.println ("*** Thread id: " + m_threadId);
      ea.printStackTrace ();
    }
  } // end of run
 
  private static void doQuery (Connection conn) throws SQLException
  {
    PreparedStatement pstmt = null;
    ResultSet rs = null;
    try
    {
      pstmt = conn.prepareStatement (query);
      rs = pstmt.executeQuery ();
      while (rs.next ())
      {
        //System.out.println ("Object name: " +rs.getString (1));
      }
    }
    catch (Exception ea)
    {
      System.out.println ("Error during execution: " +ea);
      ea.printStackTrace ();
    }
    finally
    {
      if (rs != null)
        rs.close ();
      if (pstmt != null)
        pstmt.close ();
      if (conn != null)
        conn.close ();
    }
  }  // end of doQuery (Connection)
 
  // Display the current status of the OracleOCIConnectionPool
  private static void displayPoolConfig (OracleOCIConnectionPool cpool) throws SQLException
  {
    System.out.println (" Min poolsize Limit: " + cpool.getMinLimit());
    System.out.println (" Max poolsize Limit: " + cpool.getMaxLimit());
  /*
    System.out.println (" Connection Increment: " + cpool.getConnectionIncrement());
    System.out.println (" NoWait: " + cpool.getNoWait());
    System.out.println (" Timeout: " + cpool.getTimeout());
  */
    System.out.println (" PoolSize: " + cpool.getPoolSize());
    System.out.println (" ActiveSize: " + cpool.getActiveSize());
  }
 
}  // end of class conPoolAppl

Statement Handling and Caching

Statement caching is supported with OracleOCIConnectionPool. The caching improves performance by not having to open, parse, and close cursors. When OracleOCIConnection.prepareStatement ("a_SQL_query") is processed, the statement cache is searched for a statement that matches the SQL query. If a match is found, then we can reuse the Statement object instead of incurring the cost of creating another Statement object. The cache size can be dynamically increased or decreased. The default cache size is zero.

Note:

The OracleStatement object created from OracleOCIConnection has the same behavior as one that is created from OracleConnection.

JNDI and the OCI Connection Pool

The Java Naming and Directory Interface (JNDI) feature makes persistent the properties of Java object, therefore these properties can be used to construct a new instance of the object, such as cloning the object. The benefit is that the old object can be freed, and at a later time a new object with exactly the same properties can be created. The InitialContext.bind method makes persistent the properties, either on file or in a database, while the InitialContext.lookup method retrieves the properties from the persistent store and creates a new object with these properties.

OracleOCIConnectionPool objects can be bound and looked up using the JNDI feature. No new interface calls in OracleOCIConnectionPool are necessary.