Skip Headers
Oracle® Database Error Messages
10g Release 2 (10.2)

Part Number B14219-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

50 NCR-00001 to NCR-04028

NCR-00001: NCR: Could not allocate memory
Cause: Insufficient swap space or system memory.
Action: Increase swap space or system memory.
NCR-00002: NCR: Invalid usage
Cause: Bad function parameter.
Action: Check function call.
NCR-00003: NCR: Initialization failure
Cause: Usually insufficient swap space or system memory.
Action: Increase swap space or system memory.
NCR-01003: NCRS: Read error.
Cause: Failed to read data from an input device.
Action: Check the input device driver return code for further information.
NCR-01004: NCRS: Write error.
Cause: Failed to write data to an output device.
Action: Check the output device driver return code for further information.
NCR-01005: NCRS: Failed to flush the output buffer.
Cause: Failed to write data in the output buffer to an output device.
Action: Check the output device driver return code for further information.
NCR-01006: NCRS: Data buffer overflow.
Cause: An attempt to read or write data outside of a given data buffer.
Action: Check data buffer size.
NCR-01007: NCRS: Operation is not supported in a given mode.
Cause: Attempt to perform an operation which is not supported for the current mode.
Action: See documentation for a list of work modes and supported operations.
NCR-01008: NCRS: Failed to obtain transport parameters.
Cause: Could not identify transport layer parameters.
Action: Check the transport layer return code for further information.
NCR-01009: NCRS: Record handling error.
Cause: Encountered an invalid record or an attempt to read beyond last record.
Action: See documentation for description of record handling methods.
NCR-01010: NCRS: Invalid network address length.
Cause: Network address size is set to 0.
Action: See documentation for valid network address sizes.
NCR-01011: NCRS: Send message failure.
Cause: Failed to send a message over network.
Action: Check the network interface return code for further information.
NCR-01012: NCRS: Receive message failure.
Cause: Failed to receive a network message.
Action: Check the network interface return code for further information.
NCR-01013: NCRS: Unvalid connection type.
Cause: Connection type is other than stream or message.
Action: See documentation for description of connection types.
NCR-01018: NCRS: Encryption failure.
Cause: Can not do the encryption for the data.
Action: See the SNS documentation for more information.
NCR-01019: NCRS: Checksumming failure.
Cause: Can not add the checksumming for the data.
Action: See the SNS documentation for more information.
NCR-01020: NCRS: Operation would block.
Cause: An I/O operation returned with no data read/written because the transport connection is "non-blocking" and, to succeed, the operation would have needed to block.
Action: This is a soft error; retry the operation.
NCR-02003: NCRF: Invalid type passed to format interpreter.
Cause: The format interpreter was given a data type it did not recognize.
Action: Check the types returned to the interpreter from either the type callback routine or from the type context structure.
NCR-02004: NCRF: Invalid format interpreter type context
Cause: The format interpreter was given an invalid type context.
Action: This error usually happens due to an improperly described aggregrate. For example, declaring NCRF_END_STRUCT_DATA_TYPE within a context, without a complementary NCRF_STRUCT_DATA_TYPE, is invalid.
NCR-02005: NCRF: Invalid session mode
Cause: The data format layer received a session mode other than GET,PUT or FREE.
Action: None.
NCR-02006: NCRF: Invalid floating point representation received
Cause: The data format layer received a floating point representation it did not recognize.
Action: Check incoming format descriptor for errors.
NCR-02007: NCRF: Invalid format descriptor received
Cause: The data format layer received an improperly formed format descriptor. Subsequent data could not be formatted.
Action: Check for data integrity on receipt from remote host.
NCR-02008: NCRF: Error within stream processing in format interpreter
Cause: An error occured while the interpreter was processing an NCRF_STREAM_DATA_TYPE.
Action: Check for data integrity, or for stream existence.
NCR-02009: NCRF: Unable to open trace file
Cause: Failure to open tracing file.
Action: Make sure that this is a legal file name and that the user has write access.
NCR-02010: NCRF: Call context is not available
Cause: Call context not passed to format context.
Action: Make sure that create call context has been called.
NCR-02011: NCRF: Exceeded maximum number of rfids.
Cause: Exceeded maximum number of rfids.
Action: Call Oracle Support.
NCR-03002: NCRO: Maximum number of contexts has been reached
Cause: An attempt to create either a call context or a service context has failed because all context slots are in use.
Action: Free-up context slots by destroying those contexts no longer required, or, reconfigure NCRO with more context slots.
NCR-03003: NCRO: Unexpected message
Cause: Message read from service connection is not of the expected type.
Action: Application error - debug and fix.
NCR-03004: NCRO: Unknown message
Cause: Message read from service connection is of unknown type.
Action: Internal error - contact customer support.
NCR-03005: NCRO: Orphan message
Cause: Message read from service connection is for a call context that no longer exists.
Action: Application error - debug and fix.
NCR-03006: NCRO: Invalid operation
Cause: Attempted operation over call context is invalid. For example, attempting to send IN args for a procedure which is defined to have none.
Action: Application error - debug and fix.
NCR-03007: NCRO: Context is busy
Cause: Attempted operation failed because service/call context is busy performing a previous operaion.
Action: Application error - debug and fix.
NCR-03008: NCRO: Call rejected
Cause: An attempt to execute a remote procedure has failed because the server has rejected the procedure id.
Action: If wrong procedure id, send the correct one. If wrong server was contacted, then contact the right one.
NCR-03009: NCRO: Protocol version mismatch
Cause: Client and server NCRO layers are at incompatible versions levels.
Action: Upgrade to latest NCRO version.
NCR-03010: NCRO: Transfer callback error
Cause: Application transfer callback function has returned a "FAILED" status.
Action: Debug the transfer callback function.
NCR-03012: NCRO: Invalid session mode
Cause: Attempted operation has failed because the session context is in an invalid state.
Action: Internal error - contact customer support.
NCR-03013: NCRO: Operation not supportd
Cause: Attempted operation is not supported on this service connection because it is incompatible with the NCRO version level of the remote application.
Action: Link remote application with latest NCR library.
NCR-03014: NCRO: Bad transport address
Cause: A service context cannot be created because the transport address descriptor (contained in the binding context) is invalid.
Action: Application error - initialize the transport address descriptor correctly.
NCR-03015: NCRO: No transport address
Cause: A service context cannot be created because no transport address was provided (in the binding context) and the transport protocol uses datagrams.
Action: Application error - provide a transport address.
NCR-03016: NCRO: Message has bad address
Cause: Message read from service connection has bad address information.
Action: Internal error - contact customer support.
NCR-03017: NCRO: Transport type RSLV not supported
Cause: Support for transport type RSLV has not been built.
Action: Re-compile NCR library with NCR_USE_RSLV defined.
NCR-03018: NCRO: Failed to make RSLV connection
Cause: Failure to make RSLV connection usually means that the name resolution failed or the resolved TNS address is bad.
Action: Make sure that the name is in TNSNAMES.ORA and that it is set to the correct TNS address.
NCR-03019: NCRO: Unable to initialize thread support
Cause: Attempt to initialize the Core thread package has failed.
Action: Internal error - contact customer support.
NCR-03020: NCRO: Invalid call context
Cause: The call context is not an valid call context.
Action: Call context was destroyed, probably because the Break was received
NCR-03021: NCRO: Reset the in-band line
Cause: Our parnter is asking to reset the in-band line, after receiving a break
Action: The in-band line is required to be reset
NCR-03022: NCRO: Cannot send the break
Cause: There is an error occur when sending the break using the side-band channel
Action: Read the documention regarding to side-band break support issues
NCR-03023: NCRO: Cannot receive the break
Cause: There is an error occur when receiving the break using the side-band channel
Action: Read the documention regarding to side-band break support issues
NCR-03024: NCRO: Transport type LIST not supported
Cause: Support for transport type LIST has not been built.
Action: Re-compile NCR library with NCR_USE_LIST defined.
NCR-03025: NCRO: Failed to make LIST connection(s)
Cause: Failure to make LIST connection(s) usually means one of two things: (1) Address list syntax error, (2) Could not connect with supplied addresses
Action: Check address list syntax and make sure that there is a "listener" process for each (or some) of the supplied addresses.
NCR-03026: NCRO: The result buffer has overflowed
Cause: The result buffer for holding the pickling result is too small.
Action: Please enlarge the result buffer and try again.
NCR-03027: NCRO: No remote service session set up yet.
Cause: Sender-makes-right needs the remote FID.
Action: Please set up the remote session before using the Send Make"s Right option.
NCR-03028: NCRO: Partner refused request for sender-makes-right.
Cause: Sender-makes-right was requested by the current side, yet refused by the server.
Action: Check the server side to see why it refused SMR.
NCR-04002: NCRR: Invalid interface descriptor
Cause: An attempt to register an interface has failed because of an invalid interface descriptor.
Action: Check interface descriptor passed into the ncrrri_register_interface call.
NCR-04003: NCRR: Interface exists
Cause: An attempt to register an interface has failed because an interface already exists.
Action: Application error - register a new interface, destroy the old one, or indicate that the old one must be replaced.
NCR-04004: NCRR: Invalid interface instance handle
Cause: A service registration API call has failed because of an invalid instance handle.
Action: Application error - debug and fix.
NCR-04005: NCRR: Invalid procedure handle
Cause: A procedure/object registration has failed because of an invalid procedural handle.
Action: Application error - debug and fix.
NCR-04006: NCRR: Invalid argument descriptor
Cause: A procedure registration has failed because of an invalid argument descriptor.
Action: Application error - debug and fix.
NCR-04007: NCRR: Invalid object handle
Cause: A service registration API call failed because of an invalid object handle, for example, one that does not exist.
Action: Application error - debug and fix.
NCR-04008: NCRR: Procedure exists
Cause: An attempt to register a remote procedure has failed because the procedure already exists in this interface.
Action: Application error - register a new procedure, destroy the old one, or indicate that the old one must be replaced.
NCR-04009: NCRR: Object exists
Cause: An attempt to register an object has failed because the object already exists in this interface.
Action: Application error - register a new object, destroy the old one, or indicate that the old one must be replaced.
NCR-04010: NCRR: Unable to contact Oracle Internet Directory Server
Cause: Service export or import failed to contact Oracle Internet Directory Server.
Action: Ensure Oracle Internet Directory configuration is correct. Otherwise, turn on tracing and/or contact customer support.
NCR-04011: NCRR: Oracle Internet Directory error
Cause: Service export or import failed during interaction with Oracle Internet Directory Server.
Action: Either wrong parameters with respect to the Remote Operations Service Registration Schema were passed in and/or the Oracle Internet Directory server refused to perform the requested operation. Refer the Remote Operations Service Registration Schema and/or turn on Oracle Internet Directory tracing and/or contact customer support.
NCR-04012: NCRR: Invalid address descriptor
Cause: An ncrrei_export_interface call failed because of an invalid address descriptor.
Action: Application error - debug and fix.
NCR-04013: NCRR: Insufficient authorization
Cause: Attempted Oracle Internet Directory Server operation has failed because of insufficient authorization.
Action: Contact customer support.
NCR-04014: NCRR: Invalid instance name
Cause: Service export or import failed because of an invalid instance name
Action: Application error - debug and fix.
NCR-04015: NCRR: Invalid interface name
Cause: Service export or import failed because of an invalid interface name
Action: Application error - debug and fix.
NCR-04016: NCRR: Last interface instance handle
Cause: The instance handle passed in is the last instance handle in the list.
Action: Not an error - means reaching the end of the list.
NCR-04017: NCRR: Unable to find the interface instance handle
Cause: The instance handle corresponding to the instance name was not found.
Action: Application error - debug and fix.
NCR-04018: NCRR: Unable to create the TNS address list
Cause: Unable to create the TNS address list from the interface instance list.
Action: Application error - debug and fix.
NCR-04019: NCRR: Interface or instance name already exists
Cause: Service export failed because the name already exists with the Oracle Internet Directory server
Action: Application error - debug and fix.
NCR-04020: NCRR: Interface or instance name does not exist
Cause: Service expunge/query failed because the name does not exist with the Oracle Internet Directory server
Action: Use Oracle Internet Directory tools on the relevant Oracle Internet Directory instance to verify the same. Otherwise turn on tracing and/or contact customer support
NCR-04021: NCRR: Pickler errors
Cause: Service export/query failed because of pickler errors
Action: Contact customer support
NCR-04022: NCRR: Invalid procedure descriptor
Cause: A procedure registration has failed because of an invalid procedural descriptor.
Action: Application error - debug and fix.
NCR-04023: NCRR: Invalid object descriptor
Cause: An object registration has failed because of an invalid object descriptor.
Action: Application error - debug and fix.
NCR-04024: NCRR: Maximum number of procedures reached
Cause: A procedure registration has failed because the procedures array is filled up.
Action: Re-register the interface increasing the maximum # of procedures.
NCR-04025: NCRR: Operation timed out
Cause: An operation for the Oracle Internet Directory server failed because it exceeded the timeout period.
Action: Retry the operation and/or turn on Oracle Internet Directory tracing.
NCR-04026: NCRR: Operation not supported
Cause: An operation for the Oracle Internet Directory server failed because it met with a server referral to another instance.
Action: Unify the Remote Ops registration entries into the Oracle Internet Directory instance and/or turn on Oracle Internet Directory tracing.
NCR-04027: NCRR: Operation failed
Cause: An operation for the Oracle Internet Directory server failed because the Service Registration interfaces met with invalid parameters.
Action: Contact customer support.
NCR-04028: NCRR: Operation failed
Cause: An operation for the Oracle Internet Directory server failed because the data involved exceeds the maximum allowed size.
Action: Check the entries in the Oracle Internet Directory instance with tools available from Oracle Internet Directory and/or turn on Oracle Internet Directory tracing.