Skip Headers
Oracle® Database Vault Administrator's Guide
10g Release 2 (10.2)

Part Number B25166-23
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

5 Configuring Rule Sets

This chapter contains:

What Are Rule Sets?

A rule set is a collection of one or more rules that you can associate with a realm authorization, factor assignment, command rule, or secure application role. The rule set evaluates to true or false based on the evaluation of each rule it contains and the evaluation type (All True or Any True). A rule within a rule set is a PL/SQL expression that evaluates to true or false. You can create a rule and add the rule to multiple rule sets.

You can use rule sets to accomplish the following activities:

When you create a rule set, Oracle Database Vault makes it available for selection when you configure the authorization for a realm, command rule, factor, or secure application role.

You can run reports on the rule sets that you create in Oracle Database Vault. See "Related Reports and Data Dictionary Views" for more information.

This chapter explains how to configure rule sets by using Oracle Database Vault Administrator. To configure rule sets by using the PL/SQL interfaces and packages provided by Oracle Database Vault, refer to the following chapters:

Default Rule Sets

By default, Oracle Database Vault provides the following selections for rule sets:

Creating a Rule Set

In general, to create a rule set, you first create the rule set itself, and then you edit the rule set to associate it with one or more rules. You can associate a new rule with the rule set, add existing rules to the rule set, or delete a rule association from the rule set.

See also the following sections:

To create a rule set:

  1. Log in to Oracle Database Vault Administrator as a user who has been granted the DV_OWNER or DV_ADMIN role.

    "Starting Oracle Database Vault" explains how to log in.

  2. In the Administration page, under Database Vault Feature Administration, click Rule Sets.

  3. In the Rule Sets page, click Create.

  4. In the Create Rule Set page, enter the following settings, and then click OK:

General

Enter the following settings:

Audit Options

Select from the following options to generate an audit trail for the rule set. Oracle Database Vault writes the audit trail to the DVSYS.AUDIT_TRAIL$ system file, described in Appendix A, "Auditing Oracle Database Vault."

This attribute is mandatory. The settings are:

For additional rule audit options, see "CREATE_RULE_SET Procedure".

The Oracle Database Vault audit trail, written to the DVSYS.AUDIT_TRAIL$ system table, contains the fields RULE_SET_NAME and RULE_SET_ID. These fields are populated when a rule set is associated with a realm authorization and a command authorization, and the rule set is configured to audit under some circumstances. See Appendix A, "Auditing Oracle Database Vault," for more information.

Error Handling Options

Enter the following settings to control the messaging to the database session when the rule set evaluates to false or one of the associated rules contains an invalid PL/SQL expression:

After you create a rule set, you are ready to create rules to attach to the rule set. To do so, you edit the new rule set, and then define its rules.

Configuring or Editing a Rule Set

To configure or edit a rule set:

  1. In the Oracle Database Vault Administration page, select Rule Sets.

  2. In the Rule Set page, select the rule set that you want to edit.

  3. Click Edit.

  4. Modify the rule set as necessary, and then click OK.

See Also:

Creating a Rule to Add to a Rule Set

After you create a new rule set, you can associate it with one or more rules. When you create a new rule, it is automatically added to the current rule set. You also can add existing rules to the rule set. Alternatively, you can omit adding rules to the rule set and use it as a template for rule sets you may want to create in the future.

The rule set evaluation depends on the evaluation of its rules using the Evaluation Options (All True or Any True). If a rule set is disabled, Oracle Database Vault evaluates the rule set to true without evaluating its rules.

See "How Rule Sets Work" for information on how rules are evaluated, how to nest rules, and how to create rules that exclude a particular user, such as a privileged user.

Creating a New Rule

To create and add a rule to a rule set:

  1. In the Oracle Database Vault Administration page, select Rule Sets.

  2. In the Rule Sets page, select the rule set to which you want to create and add a rule, and then select Edit.

  3. In the Edit Rule Set Page, scroll down to Rules Associated To The Rule Set and select Create.

  4. In the Create Rule page, enter the following settings:

    • Name: Enter a name for the rule. Use up to 90 characters in mixed-case.

      Oracle suggests that you start the name with a verb and complete the name with the purpose of the rule. For example:

      Prevent non-admin access to SQL*Plus
      

      Because rules do not have a Description field, make the name explicit but be sure to not exceed over 90 characters.

    • Rule Expression: Enter a PL/SQL expression that fits the following requirements:

      • It is valid in a SQL WHERE clause.

      • It can be a freestanding and valid PL/SQL Boolean expression such as the following:

        TO_CHAR(SYSDATE,'HH24') = '12'
        
      • It must evaluate to a Boolean (TRUE or FALSE) value.

      • It must be no more than 255 characters long.

      • It can contain existing and compiled PL/SQL functions from the current database instance. Ensure that these are fully qualified functions (such as schema. function_name). Do not include complete SQL statements.

        If you want to use application package functions or standalone functions, you must grant the DVSYS account the EXECUTE privilege on the function. Doing so reduces the chances of errors when you add new rules.

      • Ensure that the rule works. You can test the syntax by running the following statement in SQL*Plus:

        SELECT rule_expression FROM DUAL;
        

        For example, suppose you have created the following the rule expression:

        SYS_CONTEXT('USERENV','SESSION_USER') != 'TSMITH'
        

        You could test this expression as follows:

        SELECT SYS_CONTEXT('USERENV','SESSION_USER') FROM DUAL;
        

      See the following sections for functions that you can use in the rule set expression:

      For additional examples of expressions, see the rule defined in the rule sets provided with Oracle Database Vault. "Default Rule Sets" lists these rule sets.

  5. Click OK.

    The Edit Rule Set page appears. By default, the new rule is added to the rule set.

Editing a Rule

The changes you make to a rule apply to all rule sets that include the rule.

To edit a rule:

  1. In the Edit Rule Set page, scroll to Rules Associated To The Rule Set.

  2. Select the rule you want to edit and click Edit.

  3. In the Edit Rule page, modify the rule as necessary.

  4. Click OK.

Removing a Rule from a Rule Set

Before you remove a rule from a rule set, you can locate the various references to it by querying the rules-related Oracle Database Vault views. See "Oracle Database Vault Data Dictionary Views" for more information.

To remove a rule from a rule set:

  1. In the Edit Rule Set page, scroll to Rules Associated To The Rule Set.

  2. Select the rule you want to delete and click Remove.

  3. In the Confirmation page, click Yes.

After you remove the rule from the rule set, it still exists. If you want, you can associate it with other rule sets. If you want to delete the rule, use the DVSYS.DBMS_MACADM.DELETE_RULE function, described in "Rule Set Procedures Within DVSYS.DBMS_MACADM". For example, to delete the rule Night Shift, log in to SQL*Plus as the Database Vault Owner and enter the following statement:

EXEC DVSYS.DBMS_MACADM.DELETE_RULE('Night Shift');

Adding Existing Rules to a Rule Set

To add existing rules to a rule set:

  1. In the Rule Sets page, select the rule set that you want to add rules to, and then select Edit.

  2. Under Rules Associated To The Rule Set, select Add Existing Rules.

  3. In the Add Existing Rules page, select the rules you want, and then click Move (or Move All, if you want all of them) to move them to the Selected Rules list.

    You can select multiple rules by holding down the Ctrl key as you click each rule.

  4. Click OK.

Deleting a Rule Set

Before you delete a rule set, you can locate the various references to it by querying the rules-related Oracle Database Vault views. See "Oracle Database Vault Data Dictionary Views" for more information.

To delete a rule set:

  1. If other Database Vault objects, such as command rules, reference the rule set, then remove the reference.

    You can delete a rule set only if no other Database Vault objects are referencing it.

  2. In the Oracle Database Vault Administration page, select Rule Sets.

  3. In the Rule Set page, select the rule set that you want to remove.

  4. Click Remove.

  5. In the Confirmation page, click Yes.

    The rule set is deleted. However, the rules associated with the rule set are not deleted.

How Rule Sets Work

This section describes how rule sets work in the following ways:

How Oracle Database Vault Evaluates Rules

Oracle Database Vault evaluates the rules within a rule set as a collection of expressions. If you have set Evaluation Options to All True and if a rule fails the evaluation, then the evaluation stops at that point, instead of attempting to evaluate the rest of the rules in the rule set. Similarly, if Evaluation Options is set to Any True and if a rule evaluates to true, the evaluation stops at that point. If a rule set is disabled, Oracle Database Vault evaluates it to true without evaluating its rules.

Nesting Rules Within a Rule Set

You can nest one or more rules within the rule set. For example, suppose you want to create a nested rule, Is Corporate Network During Maintenance, that performs the following two tasks:

  • It limits table modifications only when the database session originates within the corporate network.

  • It restricts table modifications during the system maintenance window scheduled between 10:00 p.m. and 10:59 p.m.

The rule definition would be as follows:

DVF.F$NETWORK = 'Corporate' AND TO_CHAR(SYSDATE,'HH24')  '22' AND '23'

You can create it using a factor function. See "Oracle Database Vault PL/SQL Factor Functions" for more information. Chapter 7 explains how to create factors.

Creating Rules to Apply to Everyone Except One User

You can also create rules to apply to everyone except one user (for example, a privileged user). The rule definition for this type of rule can be as follows:

SYS_CONTEXT('USERENV','SESSION_USER') = 'SUPERADMIN_USER' OR additional_rule

If the current user is a privileged user, then the system evaluates the rule to true without evaluating additional_rule. If the current user is not a privileged user, then the evaluation of the rule depends on the evaluation of additional_rule.

Tutorial: Creating an Email Alert for Security Violations

This section contains:

About This Tutorial

In the following tutorial, you will create an email alert that is sent when a user attempts to alter a table outside a maintenance period. To do this, you must create a rule to set the maintenance period hours, attach this rule to a rule set, and then create a command rule to allow the user to alter the table. You then associate the rule set with this command rule, which then sends the email alert when the user attempts to use the ALTER TABLE SQL statement outside the maintenance period.

Step 1: Install and Configure the UTL_MAIL PL/SQL Package

  1. Log on to SQL*Plus as SYS using the SYSDBA privilege, and then install the UTL_MAIL package.

    sqlplus sys as sysdba
    Enter password: password
    
    @?/rdbms/admin/utlmail.sql
    @?/rdbms/admin/prvtmail.plb
    

    The UTL_MAIL package enables you to manage email. See Oracle Database PL/SQL Packages and Types Reference for more information about UTL_MAIL.

  2. Check the current value of the SMTP_OUT_SERVER parameter, and make a note of this value so that you can restore it when you complete this tutorial.

    For example:

    SHOW PARAMETER SMTP_OUT_SERVER
    
    NAME                    TYPE              VALUE
    ----------------------- ----------------- ----------------------------------
    SMTP_OUT_SERVER         string            some_value.example.com
    
  3. Issue the following ALTER SYSTEM statement:

    ALTER SYSTEM SET SMTP_OUT_SERVER="imap_mail_server.example.com";
    

    Replace imap_mail_server with the name of your SMTP server, which you can find in the account settings in your email tool. Enclose these settings in quotation marks. For example:

    ALTER SYSTEM SET SMTP_OUT_SERVER="my_imap_mail_server.example.com"
    
  4. Connect as SYS using the SYSOPER privilege and then restart the database.

    CONNECT SYS/AS SYSOPER
    Enter password: password
    
    SHUTDOWN IMMEDIATE
    STARTUP
    
  5. Ensure that the SMTP_OUT_SERVER parameter setting is correct.

    CONNECT SYS AS SYSDBA
    Enter password: password
    
    SHOW PARAMETER SMTP_OUT_SERVER
    
    NAME                    TYPE              VALUE
    ----------------------- ----------------- ----------------------------------
    SMTP_OUT_SERVER         string            my_imap_mail_server.example.com
    

Step 2: Create an Email Security Alert PL/SQL Procedure

  1. Ensure that you are connected as SYS using the SYSDBA privilege, and then grant the following privileges to a user who has been granted the DV_OWNER or DV_ADMIN role.

    For example:

    CONNECT SYS AS SYSDBA
    Enter password: password
    
    GRANT CREATE PROCEDURE, DROP ANY PROCEDURE TO lbrown_dvowner;
    GRANT EXECUTE ON UTL_TCP TO lbrown_dvowner;
    GRANT EXECUTE ON UTL_SMTP TO lbrown_dvowner;
    GRANT EXECUTE ON UTL_MAIL TO lbrown_dvowner;
    

    The UTL_TCP, UTL_SMTP, and UTL_MAIL PL/SQL packages are used by the email security alert that you will create.

  2. Connect as the Oracle Database Vault DV_OWNER or DV_ADMIN user.

    For example:

    CONNECT lbrown_dvowner
    Enter password: password
    
  3. Create the following procedure:

    CREATE OR REPLACE PROCEDURE email_alert AS
    msg varchar2(20000) := 'Realm violation occurred for the ALTER TABLE Command Security Policy rule set. The time is: '; 
    BEGIN
      msg := msg||to_char(SYSDATE, 'Day DD MON, YYYY HH24:MI:SS'); 
    UTL_MAIL.SEND (
        sender      => 'youremail@example.com',
        recipients  => 'recipientemail@example.com',
        subject     => 'Table modification attempted outside maintenance!',
        message     => msg); 
    END email_alert;
    /
    

    Replace youremail@example.com with your email address, and recipientemail@example.com with the email address of the person you want to receive the notification.

  4. Grant the EXECUTE permission on this procedure to DVSYS.

    GRANT EXECUTE ON email_alert TO DVSYS; 
    
  5. Test the settings that you have created so far.

    EXEC EMAIL_ALERT;
    COMMIT;
    

    SQL*Plus should display a PL/SQL procedure successfully completed message, and in a moment, depending on the speed of your mail server, you should receive the email alert.

Step 3: Create a Rule Set and a Command Rule to Use the Email Security Alert

  1. As the Oracle Database Vault user, create the following rule set:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_RULE_SET(
      rule_set_name    => 'ALTER TABLE Command Security Policy', 
      description      => 'This rule set allows ALTER TABLE only during the 
                           maintenance period.', 
      enabled          => DBMS_MACUTL.G_YES,
      eval_options     => DBMS_MACUTL.G_RULESET_EVAL_ANY,
      audit_options    => DBMS_MACUTL.G_RULESET_AUDIT_FAIL,,
      fail_options     => DBMS_MACUTL.G_RULESET_FAIL_SILENT,
      fail_message     => '',
      fail_code        => NULL,
      handler_options  => DBMS_MACUTL.G_RULESET_HANDLER_FAIL,
      handler          => 'dbavowner.email_alert');
    END;
    /
    
  2. Create a rule similar to the following.

    For now, set the rule expression to be during the time you will test it. For example, if you want to test it between 2 p.m. and 3 p.m., create the rule as follows:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_RULE(
      rule_name  => 'Restrict Access to Maintenance Period', 
      rule_expr  => 'TO_CHAR(SYSDATE,''HH24'') BETWEEN ''14'' AND ''15''');
     END;
    /
    

    Ensure that you use two single quotation marks instead of double quotation marks for HH24, 14, and 15. You can double-check the system time on your computer by issuing the following SQL statement:

    SELECT TO_CHAR(SYSDATE,'HH24') FROM DUAL;
    
    TO
    --
    14
    

    Later on, when you are satisfied that the rule works, you can update it to a time when your site typically performs maintenance work (for example, between 7 p.m. and 10 p.m) as follows:

    BEGIN
     DVSYS.DBMS_MACADM.UPDATE_RULE(
      rule_name  => 'Restrict Access to Maintenance Period', 
      rule_expr  => 'TO_CHAR(SYSDATE,''HH24'') BETWEEN ''19'' AND ''22''');
    END;
    /
    
  3. Add the Restrict Access to Maintenance Period rule to the ALTER TABLE Command Security Policy rule set.

    BEGIN
     DBMS_MACADM.ADD_RULE_TO_RULE_SET(
      rule_set_name => 'ALTER TABLE Command Security Policy', 
      rule_name     => 'Restrict Access to Maintenance Period'); 
     END;
     /
    
  4. Create the following command rule:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_COMMAND_RULE(
       command         => 'ALTER TABLE', 
       rule_set_name   => 'ALTER TABLE Command Security Policy', 
       object_owner    => 'SCOTT', 
       object_name     => '%', 
       enabled         => DBMS_MACUTL.G_YES);
     END; 
    /
    
  5. Commit these updates to the database.

    COMMIT;
    

Step 4: Test the Email Security Alert

  1. Connect to SQL*Plus as user SCOTT.

    For example:

    CONNECT SCOTT
    Enter password: password
    

    If the SCOTT account is locked and expired, then a user with the DV_ACCTMGR role can unlock this account and create a new password as follows:

    ALTER USER SCOTT ACCOUNT UNLOCK IDENTIFIED BY password;
    

    Replace password with a password that is secure. See Oracle Database Security Guide for the minimum requirements for creating passwords.

  2. As the user SCOTT, create a test table.

    CREATE TABLE mytest (col1 number);
    
  3. Change the system time on your computer to a time when the ALTER TABLE Command Security Policy rule set takes place (for example, between 2 p.m. and 3 p.m).

    UNIX: Log in as root and use the date command to set the time. For example, assuming the date today is December 14, 2011, you would enter the following:

    su root
    Password: password
    
    date --set="14 DEC 2011 14:00:00"
    

    Windows: Double-click the clock icon, which is typically at the lower right corner of the screen. In the Date and Time Properties window, set the time to 2 p.m., and then click OK.

  4. Try altering the my_test table.

    ALTER TABLE mytest ADD (col2 number);
    
    Table altered.
    

    SCOTT should be able to alter the mytest table during this time.

  5. Reset the system time to a time outside the Restrict Access to Maintenance Period time.

  6. Connect as SCOTT and try altering the my_test table again.

    CONNECT SCOTT
    Enter password: password
    
    ALTER TABLE mytest ADD (col3 number);
    
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-47400: Command Rule violation for alter table on SCOTT.MYTEST
    ORA-06512: at "DVSYS.AUTHORIZE_EVENT", line 55
    ORA-06512: at line 31
    

    SCOTT cannot alter the mytest table. In a moment, you should receive an email with the subject header Table modification attempted outside maintenance! and with a message similar to the following:

    Realm violation occurred for the ALTER TABLE Command Security Policy rule set. The time is: Wednesday 28 NOV, 2007 14:24:25
    
  7. Reset the system time to the correct time.

Step 5: Remove the Components for This Tutorial

  1. Connect to SQL*Plus as the Oracle Database Vault DV_OWNER or DV_ADMIN user account.

    For example:

    CONNECT lbrown_dvowner
    Enter password: password
    
  2. Enter the following commands in the order shown to delete the rule set components.

    EXEC DVSYS.DBMS_MACADM.DELETE_RULE_FROM_RULE_SET('ALTER TABLE Command Security Policy', 'Restrict Access to Maintenance Period');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE('Restrict Access to Maintenance Period');
    EXEC DVSYS.DBMS_MACADM.DELETE_COMMAND_RULE('ALTER TABLE', 'SCOTT', '%');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE_SET('ALTER TABLE Command Security Policy');
    
  3. Drop the email_alert PL/SQL procedure.

    DROP PROCEDURE email_alert;
    
  4. Connect as user SCOTT and remove the mytest table.

    CONNECT SCOTT
    Enter password: password
    
    DROP TABLE mytest;
    
  5. Connect as SYS using the SYSDBA privilege and then revoke the EXECUTE privilege on the UTL_TCP, UTL_SMTP, and UTL_MAIL PL/SQL packages from the Oracle Database Vault Owner account.

    For example:

    REVOKE EXECUTE ON UTL_TCP FROM lbrown_dvowner;
    REVOKE EXECUTE ON UTL_SMTP FROM lbrown_dvowner;
    REVOKE EXECUTE ON UTL_MAIL FROM lbrown_dvowner;
    
  6. Set the SMTP_OUT_SERVER parameter to its original value.

    For example:

    ALTER SYSTEM SET SMTP_OUT_SERVER="some_value.my_company.com";
    
  7. Restart the database. For example:

    CONNECT SYS/AS SYSOPER
    Enter password: password
    
    SHUTDOWN IMMEDIATE
    STARTUP
    

Tutorial: Configuring Two-Person Integrity, or Dual Key Security

This section contains:

About This Tutorial

In this tutorial, you configure a rule set that defines two-person integrity (TPI), also called dual key security, dual key connection, and two-man rule security. In this type of security, two users are required to authorize an action, instead of one user. The idea is that one user provides a safety check for the other user before that user can proceed with a task. Two-person integrity provides an additional layer of security for actions that can potentially be dangerous. This type of scenario is often used for tasks such as database patch updates, which is what this tutorial will demonstrate. One user, patch_user must log in to perform a database patch upgrade, but the only way that he can do this is if his manager, patch_boss is already logged in. You will create a function, rules, a rule set, and a command rule to control patch_user's ability to log in.

Step 1: Create Users for This Tutorial

You must create the following two users for this tutorial:

  • patch_boss acts in a supervisory role: If patch_boss is not logged in, then the patch_user user cannot log in.

  • patch_user is the user who is assigned to perform the patch upgrade. However, for this tutorial, user patch_user does not actually perform a patch upgrade. He only attempts to log in.

To create the users:

  1. Connect to SQL*Plus as a user who has been granted the DV_ACCTMGR role.

    For example:

    CONNECT amalcolm_dvacctmgr
    Enter password: password
    
  2. Create the following users.

    CREATE USER patch_boss IDENTIFIED BY password;
    CREATE USER patch_user IDENTIFIED BY password;
    

    Replace password with a password that is secure. See Oracle Database Security Guide for the minimum requirements for creating passwords.

  3. Connect as user SYS with the SYSDBA privilege and grant privileges to the patch_boss and patch_user users.

    CONNECT SYS AS SYSDBA
    Enter password: password
    
    GRANT CREATE SESSION TO patch_boss, patch_user;
    
  4. Grant the following privileges to the DV_OWNER or DV_ADMIN user.

    For example:

    GRANT CREATE PROCEDURE TO lbrown_dvowner;
    GRANT SELECT ON V_$SESSION TO lbrown_dvowner;
    

Step 2: Create a Function to Check if User patch_boss Is Logged In

The function that you must create, check_boss_logged_in, does just that: When user patch_user tries to log in to SQL*Plus, it checks that user patch_boss is already logged in by checking the V$SESSION data dictionary view.

To create the check_boss_logged_in function:

  1. As the DV_OWNER or DV_ADMIN user, create the check_boss_logged_in function as follows:

    CREATE OR REPLACE FUNCTION check_boss_logged_in
    return varchar2
    authid definer as 
     
    v_session_number number := 0;
    v_allow varchar2(10)    := 'TRUE';
    v_deny varchar2(10)     := 'FALSE';
     
    BEGIN
      SELECT COUNT(*) INTO v_session_number
      FROM SYS.V_$SESSION
      WHERE USERNAME = 'PATCH_BOSS'; -- Enter the user name in capital letters.
     
     IF v_session_number > 0
      THEN RETURN v_allow;
     ELSE
      RETURN v_deny;
     END IF;
    END check_boss_logged_in;
    /
    
  2. Grant the EXECUTE privilege on the check_boss_logged_in function to the DVSYS schema.

    GRANT EXECUTE ON check_boss_logged_in to DVSYS;
    

Step 3: Create Rules, a Rule Set, and a Command Rule to Control the Users' Access

Next, you must create two rules, a rule set to which you will add them, and a command rule. The rule set triggers the check_boss_logged_in function when user patch_user tries to logs in to the database.

To create the rules and rule set:

  1. Connect as a user who has been granted the DV_OWNER or DV_ADMIN role.

    For example:

    CONNECT lbrown_dvowner
    Enter password: password
    
  2. Create the Check if Boss Is Logged In rule, which checks that the patch_user user is logged in to the database. In the definition, replace lbrown_dvowner with the name of the DVOWNER or DV_ADMIN user who created the check_boss_logged_in function.

    If the check_boss_logged_in function returns TRUE (that is, patch_boss is logged in to another session), then patch_user can log in.

    BEGIN
      DVSYS.DBMS_MACADM.CREATE_RULE(
      rule_name => 'Check if Boss Is Logged In',
      rule_expr => 'SYS_CONTEXT(''USERENV'',''SESSION_USER'') = ''PATCH_USER'' and lbrown_dvowner.check_boss_logged_in =  ''TRUE'' ');
    END;
    /
    

    Enter the user name, PATCH_USER, in upper-case letters, which is how the SESSION_USER parameter stores it.

  3. Create the Allow Connect for Other Database Users rule, which ensures that the user logged in (patch_user) is not user patch_boss. It also enables all other valid users to log in.

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_RULE(
      rule_name => 'Allow Connect for Other Database Users',
      rule_expr => 'SYS_CONTEXT(''USERENV'',''SESSION_USER'') != ''PATCH_USER''');
    END;
    /
    COMMIT;
    
  4. Create the Dual Connect for Boss and Patch rule set, and then add the two rules to it.

    BEGIN
         DVSYS.DBMS_MACADM.CREATE_RULE_SET(
         rule_set_name => 'Dual Connect for Boss and Patch',
         description => 'Checks if both boss and patch users are logged in.',
         enabled           => DBMS_MACUTL.G_YES,
         eval_options      => DBMS_MACUTL.G_RULESET_EVAL_ANY,
         audit_options     => DBMS_MACUTL.G_RULESET_AUDIT_FAIL,
         fail_options      => DBMS_MACUTL.G_RULESET_FAIL_SILENT,
         fail_message      =>'',
         fail_code         => NULL,
         handler_options   => DBMS_MACUTL.G_RULESET_HANDLER_OFF,
         handler           => ''
         );
    END;
    /
    
    BEGIN
         DVSYS.DBMS_MACADM.ADD_RULE_TO_RULE_SET(
         rule_set_name     => 'Dual Connect for Boss and Patch',
         rule_name         => 'Check if Boss Is Logged In'
       );
    END;
    /
    
    BEGIN
         DVSYS.DBMS_MACADM.ADD_RULE_TO_RULE_SET(
         rule_set_name     => 'Dual Connect for Boss and Patch',
         rule_name         => 'Allow Connect for Other Database Users'
       );
    END;
    /
    
  5. Create the following CONNECT command rule, which permits user patch_user to connect to the database only if patch_boss is already logged in.

    BEGIN
       DVSYS.DBMS_MACADM.CREATE_COMMAND_RULE(
       command             => 'CONNECT',
       rule_set_name       => 'Dual Connect for Boss and Patch',
       object_owner        => '%',
       object_name         => '%',
       enabled             => DBMS_MACUTL.G_YES);
    END;
    /
    COMMIT;
    

Step 4: Test the Users' Access

  1. Exit SQL*Plus.

    EXIT
    
  2. Create a second shell, for example:

    xterm &
    
  3. In the first shell, try to log in as user patch_user.

    sqlplus patch_user
    Enter password: password
    
    ERROR:
    ORA-47400: Command Rule violation for CONNECT on LOGON
    
    Enter user-name:
    

    User patch_user cannot log in until user patch_boss is already logged in. (Do not try the Enter user-name prompt yet.)

  4. Open a second shell and then log in as user patch_boss.

    sqlplus patch_boss
    Enter password: password
    Connected. 
    

    User patch_boss can log in.

  5. Go back to the first shell, and then try logging in as user patch_user again.

    Enter user_name: patch_user
    Enter password: password
    

    This time, user patch_user is deemed a valid user, so now he can log in.

Step 5: Remove the Components for This Tutorial

  1. In the session for the user patch_boss, exit SQL*Plus and then close the shell.

    EXIT
    
  2. In the first shell, connect the DV_ACCTMGR user and remove the users you created.

    CONNECT amalcolm_dvacctmgr
    Enter password: password
    
    DROP USER patch_boss;
    DROP USER patch_user;
    
  3. Connect as user SYS with the SYSDBA privilege and revoke the privileges that you had granted to the DV_OWNER or DV_ADMIN user.

    CONNECT SYS AS SYSDBA
    Enter password: password
    
    REVOKE CREATE PROCEDURE FROM lbrown_dvowner;
    REVOKE SELECT ON V_$SESSION FROM lbrown_dvowner;
    
  4. Connect as the DV_OWNER or DV_ADMIN user and drop the rules, rule set, and command rule, in the order shown.

    CONNECT lbrown_dvowner
    Enter password: password
    
    DROP FUNCTION check_boss_logged_in;
    EXEC DVSYS.DBMS_MACADM.DELETE_COMMAND_RULE('CONNECT', '%', '%');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE_FROM_RULE_SET('Dual Connect for Boss and Patch', 'Check if Boss Is Logged In');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE_FROM_RULE_SET('Dual Connect for Boss and Patch', 'Allow Connect for Other Database Users');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE('Check if Boss Is Logged In');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE('Allow Connect for Other Database Users');
    EXEC DVSYS.DBMS_MACADM.DELETE_RULE_SET('Dual Connect for Boss and Patch');
    

Guidelines for Designing Rule Sets

Follow these guidelines for designing rule sets:

How Rule Sets Affect Performance

In general, the more rules and more complex the rules, the more performance overhead the performance for execution of certain operations governed by these rule sets. For example, if you have a very large number of rules in a rule set governing a SELECT statement, performance could degrade significantly.

If you have rule sets that require many rules, performance improves if you move all the rules to logic defined in a single PL/SQL standalone or package function. However, if a rule is used by other rule sets, there is little performance effect on your system.

You can check system performance by running tools such as Oracle Enterprise Manager (including Oracle Enterprise Manager Database Control, which is installed by default with Oracle Database), Statspack, and TKPROF. For more information about Oracle Enterprise Manager, see the Oracle Enterprise Manager documentation set. For information about Database Control, refer to its online Help. Oracle Database Performance Tuning Guide describes the Statspack and TKPROF utilities.

Related Reports and Data Dictionary Views

Table 5-1 lists Oracle Database Vault reports that are useful for analyzing rule sets and the rules within them. See Chapter 17, "Oracle Database Vault Reports" for information about how to run these reports.

Table 5-1 Reports Related to Rule Sets

Report Description

"Rule Set Configuration Issues Report"

Lists rule sets that have no rules defined or enabled

"Secure Application Configuration Issues Report"

Lists secure application roles that have incomplete or disabled rule sets

"Command Rule Configuration Issues Report"

Lists rule sets that are incomplete or disabled


Table 5-2 lists data dictionary views that provide information about existing rules and rule sets.

Table 5-2 Data Dictionary Views Used for Rules and Rule Sets

Data Dictionary View Description

"DBA_DV_RULE View"

Lists the rules that have been defined

"DBA_DV_RULE_SET View"

Lists the rules sets that have been created

"DBA_DV_RULE_SET_RULE View"

Lists rules that are associated with existing rule sets