99 DBMS_SPACE_ADMIN

Using DBMS_SPACE_ADMIN

This section contains topics which relate to using the DBMS_SPACE_ADMIN package.

• Security Model

• Constants

• Operational Notes

---

Security Model

This package runs with SYS privileges; therefore, any user who has privilege to execute the package can manipulate the bitmaps.

---

Constants

---

Operational Notes

Before migrating the SYSTEM tablespace, the following conditions must be met. These conditions are enforced by the TABLESPACE_MIGRATE_TO_LOCAL procedure, except for the cold backup.

• The database must have a default temporary tablespace that is not SYSTEM.

• Dictionary-managed tablespaces cannot have any rollback segments.

• A locally managed tablespace must have at least one online rollback segment. If you are using automatic undo management, an undo tablespace must be online.

• All tablespaces—except the tablespace containing the rollback segment or the undo tablespace—must be read-only.

• You must have a cold backup of the database.

• The system must be in restricted mode.

Summary of DBMS_SPACE_ADMIN Subprograms

---

ASSM_SEGMENT_VERIFY Procedure

Given a segment definition, the procedure verifies the basic consistency of the space metadata blocks as well as consistency between space metadata and segment data blocks. This procedure verifies segments created in ASSM (Automatic Segment Space Management) tablespaces.

There is however a difference between basic verification and deep verification:

• Basic verification involves consistency checks of space metadata, such as integrity among level 1, level 2, level 3 bitmap blocks, consistency of segment extent map and level 1 bitmap ranges.

• Deep verification involves consistency checks between datablocks and space metadata blocks such as whether the datablocks point correctly to the parent level 1 bitmap blocks, whether the freeness states in the datablocks are consistent with the freeness states of bits in level 1 bitmap blocks corresponding to the datablocks

Syntax

DBMS_SPACE_ADMIN.ASSM_SEGMENT_VERIFY (
   segment_owner   IN VARCHAR2,
   segment_name    IN VARCHAR2,
   segment_type    IN VARCHAR2,
   partition_name  IN VARCHAR2,
   verify_option   IN POSITIVE  DEFAULT SEGMENT_VERIFY_BASIC,
   attrib          IN POSITIVE  DEFAULT NULL);

Parameters

Usage Notes

• Using this procedure requires SYSDBA privileges to execute.

• You can determine the relative file # and header block # (header_relative_file and header_block parameters) by querying DBA_SEGMENTS.

• This procedure outputs a dump file named sid_ora_process_ID.trc to the location specified in the USER_DUMP_DEST initialization parameter.

---

ASSM_TABLESPACE_VERIFY Procedure

This procedures verifies all the segments created in an ASSM tablespace. The verification per segment is either basic consistency checks of the space metadata blocks as well as consistency checks between space metadata and segment data blocks.

Syntax

DBMS_SPACE_ADMIN.ASSM_TABLESPACE_VERIFY (
   tablespace_name   IN VARCHAR2,
   ts_option         IN POSITIVE,
   segment_option    IN POSITIVE DEFAULT NULL);

Parameters

Usage Notes

Using this procedure requires SYSDBA privileges to execute.

This procedure outputs a dump file named sid_ora_process_ID.trc to the location specified in the USER_DUMP_DEST initialization parameter.

---

SEGMENT_CORRUPT Procedure

This procedure marks the segment corrupt or valid so that appropriate error recovery can be done. It cannot be used on the SYSTEM tablespace.

Syntax

DBMS_SPACE_ADMIN.SEGMENT_CORRUPT (
   tablespace_name         IN    VARCHAR2,
   header_relative_file    IN    POSITIVE,
   header_block            IN    POSITIVE,
   corrupt_option          IN    POSITIVE  DEFAULT SEGMENT_MARK_CORRUPT);

Parameters

Examples

The following example marks the segment as corrupt:

EXECUTE DBMS_SPACE_ADMIN.SEGMENT_CORRUPT('USERS', 4, 33, 3); 

Alternately, the next example marks a corrupt segment valid:

EXECUTE DBMS_SPACE_ADMIN.SEGMENT_CORRUPT('USERS', 4, 33, 4); 

---

SEGMENT_DROP_CORRUPT Procedure

This procedure drops a segment currently marked corrupt (without reclaiming space). For this to work, the segment should have been marked temporary. To mark a corrupt segment as temporary, issue a DROP command on the segment.

Syntax

DBMS_SPACE_ADMIN.SEGMENT_DROP_CORRUPT (
   tablespace_name         IN    VARCHAR2,
   header_relative_file    IN    POSITIVE,
   header_block            IN    POSITIVE);

Parameters

Usage Notes

The procedure cannot be used on the SYSTEM tablespace.

The space for the segment is not released, and it must be fixed by using the TABLESPACE_FIX_BITMAPS Procedure or the TABLESPACE_REBUILD_BITMAPS Procedure.

Examples

EXECUTE DBMS_SPACE_ADMIN.SEGMENT_DROP_CORRUPT('USERS', 4, 33); 

---

SEGMENT_DUMP Procedure

This procedure dumps the segment header and bitmap blocks of a specific segment to the location specified in the USER_DUMP_DEST initialization parameter.

Syntax

DBMS_SPACE_ADMIN.SEGMENT_DUMP (
   tablespace_name         IN    VARCHAR2,
   header_relative_file    IN    POSITIVE,
   header_block            IN    POSITIVE,
   dump_option             IN    POSITIVE  DEFAULT SEGMENT_DUMP_EXTENT_MAP);

Parameters

Usage Notes

• You can produce a slightly abbreviated dump, which includes the segment header and bitmap block summaries, without percent-free states of each block if you pass SEGMENT_DUMP_BITMAP_SUMMARY as the dump_option parameter.

• You can determine the relative file # and header block # (header_relative_file and header_block parameters) by querying DBA_SEGMENTS.

Examples

EXECUTE DBMS_SPACE_ADMIN.SEGMENT_DUMP('USERS', 4, 33); 

---

SEGMENT_VERIFY Procedure

This procedure checks the consistency of the segment extent map with the tablespace file bitmaps.

Syntax

DBMS_SPACE_ADMIN.SEGMENT_VERIFY (
   tablespace_name         IN    VARCHAR2,
   header_relative_file    IN    POSITIVE,
   header_block            IN    POSITIVE,
   verify_option           IN    POSITIVE  DEFAULT SEGMENT_VERIFY_EXTENTS);

Parameters

Usage Notes

Anomalies are output as dba-range, bitmap-block, bitmap-block-range, anomaly-information, in the trace file for all dba-ranges found to have incorrect space representation. The kinds of problems which would be reported are free space not considered free, used space considered free, and the same space considered used by multiple segments.

Examples

The following example verifies that the segment with segment header at relative file number 4, block number 33, has its extent maps and bitmaps in sync.

EXECUTE DBMS_SPACE_ADMIN.SEGMENT_VERIFY('USERS', 4, 33, 1); 

---

TABLESPACE_FIX_BITMAPS Procedure

This procedure marks the appropriate DBA range (extent) as free or used in bitmap. It cannot be used on the SYSTEM tablespace.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_FIX_BITMAPS (
   tablespace_name         IN    VARCHAR2,
   dbarange_relative_file  IN    POSITIVE,
   dbarange_begin_block    IN    POSITIVE,
   dbarange_end_block      IN    POSITIVE,
   fix_option              IN    POSITIVE);

Parameters

Examples

The following example marks bits for 51 blocks for relative file number 4, beginning at block number 33 and ending at 83, as USED in bitmaps.

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_FIX_BITMAPS('USERS', 4, 33, 83, 7); 

Alternately, specifying an option of 8 marks the bits FREE in bitmaps. The BEGIN and END blocks should be in extent boundary and should be extent multiple. Otherwise, an error is raised.

---

TABLESPACE_FIX_SEGMENT_STATES Procedure

Use this procedure to fix the state of the segments in a tablespace in which migration was aborted. During tablespace migration to or from local, the segments are put in a transient state. If migration is aborted, the segment states are corrected by SMON when event 10906 is set. Database with segments in such a transient state cannot be downgraded. The procedure can be used to fix the state of such segments.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_FIX_SEGMENT_STATES (
   tablespace_name     IN    VARCHAR);

Parameters

Usage Notes

The tablespace must be kept online and read/write when this procedure is called.

Examples

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_FIX_SEGMENT_STATES('TS1') 

---

TABLESPACE_MIGRATE_FROM_LOCAL Procedure

This procedure migrates a locally-managed tablespace to a dictionary-managed tablespace. You cannot use this procedure for SYSTEM tablespace.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_FROM_LOCAL (
   tablespace_name         IN    VARCHAR2);

Parameter

Usage Notes

The tablespace must be kept online and read/write during migration. Migration of temporary tablespaces and migration of SYSTEM tablespaces are not supported.

Examples

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_FROM_LOCAL('USERS'); 

---

TABLESPACE_MIGRATE_TO_LOCAL Procedure

Use this procedure to migrate the tablespace from a dictionary-managed format to a locally managed format. Tablespaces migrated to locally managed format are user managed.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_TO_LOCAL (
   tablespace_name     IN     VARCHAR,
   unit_size           IN     POSITIVE DEFAULT NULL,
   rfno                IN     INTGER DEFAULT NULL);

Parameters

Usage Notes

Before you migrate the SYSTEM tablespace, you should migrate any dictionary-managed tablespaces that you may want to use in read/write mode to locally managed. After the SYSTEM tablespace is migrated, you cannot change dictionary-managed tablespaces to read/write.

The tablespace must be kept online and read/write during migration. Note that temporary tablespaces cannot be migrated.

Allocation Unit may be specified optionally. The default is calculated by the system based on the highest common divisor of all extents (used or free) for the tablespace. This number is further trimmed based on the MINIMUM EXTENT for the tablespace (5 if MINIMUM EXTENTT is not specified). Thus, the calculated value will not be larger than the MINIMUM EXTENT for the tablespace. The last free extent in every file will be ignored for GCD calculation. If you specify the unit size, it has to be a factor of the UNIT size calculated by the system, otherwise an error message is returned.

The Relative File Number parameter is used to place the bitmaps in a desired file. If space is not found in the file, an error is issued. The data file specified should be part of the tablespace being migrated. If the dataflow is not specified then the system will choose a dataflow in which to place the initial bitmap blocks. If space is not found for the initial bitmaps, an error will be raised.

Examples

To migrate a tablespace 'TS1' with minimum extent size 1m, use

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_TO_LOCAL('TS1', 512, 2);

The bitmaps will be placed in file with relative file number 2.

---

TABLESPACE_REBUILD_BITMAPS Procedure

This procedure rebuilds the appropriate bitmaps. If no bitmap block DBA is specified, then it rebuilds all bitmaps for the given tablespace.

The procedure cannot be used on the SYSTEM tablespace.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_REBUILD_BITMAPS (
   tablespace_name         IN    VARCHAR2,
   bitmap_relative_file    IN    POSITIVE   DEFAULT NULL,
   bitmap_block            IN    POSITIVE   DEFAULT NULL);

Parameters

Usage Notes

Examples

The following example rebuilds bitmaps for all the files in the USERS tablespace.

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_REBUILD_BITMAPS('USERS'); 

---

TABLESPACE_REBUILD_QUOTAS Procedure

This procedure rebuilds quotas for the given tablespace.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_REBUILD_QUOTAS (
   tablespace_name         IN    VARCHAR2);

Parameters

Examples

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_REBUILD_QUOTAS('USERS');

---

TABLESPACE_RELOCATE_BITMAPS Procedure

Use this procedure to relocate the bitmaps to the destination specified.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_RELOCATE_BITMAPS (
   tablespace_name    IN      VARCHAR2,
   filno              IN      POSITIVE,
   blkno              IN      POSITIVE);

Parameters

Usage Notes

Migration of a tablespace from dictionary managed to locally managed format could result in the creation of SPACE HEADER segment that contains the bitmap blocks. The SPACE HEADER segment is treated as user data. If the user wishes to explicitly resize a file at or below the space header segment, an error is issued. Use the TABLESPACE_RELOCATE_BITMAPS command to move the control information to a different destination and then resize the file.

This procedure cannot be used on the SYSTEM tablespace.

The tablespace must be kept online and read/write during relocation of bitmaps. This can be done only on migrated locally managed tablespaces.

Examples

EXECUTE  DBMS_SPACE_ADMIN.TABLESPACE_RELOCATE_BITMAPS('TS1', 3, 4);

Moves the bitmaps to file 3, block 4.

---

TABLESPACE_VERIFY Procedure

This procedure verifies that the bitmaps and extent maps for the segments in the tablespace are in sync.

Syntax

DBMS_SPACE_ADMIN.TABLESPACE_VERIFY (
   tablespace_name         IN    VARCHAR2,
   verify_option           IN    POSITIVE DEFAULT TABLESPACE_VERIFY_BITMAP);

Parameters

Examples

EXECUTE DBMS_SPACE_ADMIN.TABLESPACE_VERIFY('USERS');