| Oracle Procedural Gateway® for APPC User's Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B16212-01 |
|
|
PDF · Mobi · ePub |
| Oracle Procedural Gateway® for APPC User's Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B16212-01 |
|
|
PDF · Mobi · ePub |
The Oracle Procedural Gateway for APPC requires the use of the RAW datatype to transfer data to and from PL/SQL without any alteration by Oracle Net. This is necessary because only the PL/SQL applications have information about the format of the data being sent to and received from the remote transaction programs. Oracle Net only has information about the systems where the PL/SQL application and the gateway server are running. If Oracle Net is allowed to perform translation on the data flowing between PL/SQL and the gateway, the data can end up in the wrong format.
This appendix contains the following sections:
The UTL_RAW package is an extension to PL/SQL that provides a full complement of RAW data manipulation functions. Using these functions, data sent to remote transaction programs can be converted into the correct format by the PL/SQL application, and data received from remote transaction programs can be converted back into Oracle formats.
All of the functions listed in this section are called in the standard PL/SQL manner, which is package_name.function_name(arguments). In the case of the UTL_RAW routines, this is UTL_RAW.function_name(arguments).
For each function listed in the following sections, the function name, arguments and their datatypes, and the return value datatype are provided. Unless otherwise specified, the parameters are IN, not OUT, parameters.
BIT_AND performs a bitwise logical AND operation of the values in r1 and r2 and returns the resulting value.
If r1 and r2 have different lengths, then the AND operation is terminated after the last byte of the shorter of the two RAW values. The unprocessed portion of the longer RAW value is appended to the partial result to produce the final result returned. The result length equals the longer of the two input RAW values.
function BIT_AND (r1 IN RAW, r2 IN RAW) RETURN RAW;
Where Table C-1 describes the parameters in this function:
Table C-1 BIT_AND Function Parameters
| Parameter | Description |
|---|---|
|
|
is a RAW value to be combined with |
|
|
is a RAW value to be combined with |
None.
A RAW value which is the bitwise logical AND of r1 and r2. Or a null value if either r1 or r2 is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
BIT_COMPLEMENT performs a bitwise logical COMPLEMENT operation of the value r and returns the resulting RAW value. The length of the result equals the length of the input RAW value r.
function BIT_COMPLEMENT (r IN RAW) RETURN RAW;
where:
"r" is the RAW value on which to perform the COMPLEMENT operation.
None
A RAW value which is the bitwise logical COMPLEMENT of r. Or a null value if the input value r is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
BIT_OR performs a bitwise logical OR operation of the values in r1 and r2 and returns the resulting value.
If r1 and r2 have different lengths, then the OR operation is terminated after the last byte of the shorter of the two RAW values. The unprocessed portion of the longer RAW value is appended to the partial result to produce the final result returned. The resulting length equals the longer of the two input values, r1 and r2.
function BIT_OR (r1 IN RAW, r2 IN RAW) RETURN RAW;
Where Table C-2 describes the parameters in the function:
Table C-2 BIT_OR Function Parameters
| Parameter | Description |
|---|---|
|
|
is a RAW value to OR with |
|
|
is a RAW value to OR with |
None
A RAW value which is the bitwise logical OR of r1 and r2. Or a null value if both r1 and r2 is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
BIT_XOR performs a bitwise logical EXCLUSIVE OR operation of the values in r1 and r2 and returns the resulting value.
If r1 and r2 have different lengths, then the EXCLUSIVE OR operation is terminated after the last byte of the shorter of the two RAW values. The unprocessed portion of the longer RAW value is appended to the partial result to produce the final result returned. The result length equals the longer of the two input RAW values.
function BIT_XOR (r1 IN RAW, r2 IN RAW) RETURN RAW
Where Table C-3 describes the parameters in this function:
Table C-3 BIT_XOR Function Parameters
| Parameter | Description |
|---|---|
|
|
is the RAW value to XOR with |
|
|
is the RAW value to XOR with |
None
A RAW value which is the bitwise logical XOR of r1 and r2. Or a null value if r1 and r2 have identical values.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
CAST_TO_RAW converts a VARCHAR2 c into a RAW with the same number of bytes.
The input is treated as if it is composed of single 8-bit bytes, not characters. Multibyte character boundaries are ignored. The data is not modified in any way, it is just changed to a RAW datatype.
function CAST_TO_RAW (c IN VARCHAR2) RETURN RAW;
where: "c" is a VARCHAR2 value to be changed to a RAW value.
None
A RAW value having the same data and byte length as the input VARCHAR2 value. Or a null value if c is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
CAST_TO_VARCHAR2 converts a RAW r into a VARCHAR2 with the same number of data bytes.
The result is treated as if it is composed of single 8-bit bytes, not characters. Multibyte character boundaries are ignored. The data is not modified in any way, it is just changed to a VARCHAR2 datatype.
function CAST_TO_VARCHAR2 (r IN RAW) RETURN VARCHAR2;
where:
"r" is a RAW value to be changed to a VARCHAR value.
None
A VARCHAR2 value having the same data as the RAW input value. Or a null value if r is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
COMPARE compares RAW r1 with RAW r2.
If they are identical, COMPARE returns zero. Otherwise, COMPARE returns the position of the first byte that does not match. If the input values are of different length, the shorter RAW value is padded on the right with the byte specified by pad.
function COMPARE (r1 IN RAW, r2 IN RAW, pad RAW DEFAULT NULL) RETURN NUMBER;
Where Table C-4 describes the parameters in this function:
Table C-4 COMPARE Function Parameters
| Parameter | Description |
|---|---|
|
|
is the first RAW value to be compared. This may be null and/or have a length of 0. |
|
|
is the second RAW value to be compared. This might be null and/or have a length of 0. |
|
|
is a 1 byte value used to pad the shorter RAW value. |
where "pad" is optional and defaults to x'00'.
A value of 0 if the strings are null or identical. Or the position, numbered from 1, of the first mismatched byte.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
CONCAT concatenates a set of up to 12 RAW values (r1 - r12) into a single RAW and returns it.
Input RAW values are appended together in the resulting RAW, left to right, in the order they appear in the parameter list. Input values need not be contiguous. Null input RAW values are skipped and the concatenation continues with the next non-null input RAW value. If the sum of the lengths of the input RAWs exceeds the maximum allowable length for a RAW (32767), an error is returned.
function CONCAT (r1 IN RAW DEFAULT NULL, r2 RAW DEFAULT NULL, r3 RAW DEFAULT NULL, r4 RAW DEFAULT NULL, r5 RAW DEFAULT NULL, r6 RAW DEFAULT NULL, r7 RAW DEFAULT NULL, r8 RAW DEFAULT NULL, r9 RAW DEFAULT NULL, r10 RAW DEFAULT NULL, r11 RAW DEFAULT NULL, r12 RAW DEFAULT NULL) RETURN RAW;
where:
"r1 - r12" are the RAW items to be concatenated.
None
A RAW value with the concatenated items.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
CONVERT converts RAW r from character set from_charset to character set to_charset and returns the resulting RAW value.
Both from_charset and to_charset must specify supported character sets defined to the Oracle server.
function CONVERT (r IN RAW, to_charset IN VARCHAR2, from_charset IN VARCHAR2) RETURN RAW;
Where Table C-5 describes the parameters in this function:
Table C-5 CONVERT Function Parameters
| Parameter | Description |
|---|---|
|
|
is the RAW byte-string to be converted. |
|
|
is the NLS character set to convert |
|
|
is the NLS character set that |
None
A RAW string of bytes converted according to the specified character set.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
COPIES returns n copies of RAW r concatenated together.
function COPIES (r IN RAW, n IN NUMBER) RETURN RAW;
Where Table C-6 describes the parameters in this function:
Table C-6 COPIES Function Parameters
| Parameter | Description |
|---|---|
|
|
is the RAW value to be copied. |
|
|
is the number of times to copy the RAW value. This must be a positive value. |
None
The RAW value copied n times.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
LENGTH returns the length in bytes of RAW r.
function LENGTH (r IN RAW) RETURN NUMBER;
where:
"r" is the byte stream to be measured.
None
The current length of the RAW input value.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
OVERLAY replaces the specified portion of RAW target with RAW overlay, beginning at byte position pos of target, and proceeding for len bytes.
If overlay has fewer than len bytes, then overlay is padded to len bytes using the byte specified by pad. If overlay has more than len bytes, then the extra bytes in overlay are ignored. If len bytes beginning at position pos of target exceeds the length of target, target is extended to contain the entire length of overlay. If pos exceeds the length of target, target is padded with pad bytes to position pos and then target is further extended with overlay bytes.
function OVERLAY (overlay IN RAW, target IN RAW, pos IN BINARY_INTEGER DEFAULT 1, len IN BINARY_INTEGER DEFAULT NULL, pad IN RAW DEFAULT NULL) RETURN RAW;
Where Table C-7 describes the parameters in this function:
Table C-7 OVERLAY Function Parameters
| Parameter | Description |
|---|---|
|
|
is a byte-string used to overlay the target. Bytes are always selected from the overlay RAW beginning with the leftmost byte. |
|
|
is the byte-string to be overlayed. |
|
|
is the position within the target RAW, numbered from 1, at which to begin overlaying. This value must be greater than zero. This parameter is optional. |
|
|
is the number of bytes to overlay. This must be greater than or equal to zero. This parameter is optional. |
|
|
is a single byte value used to pad when |
Table C-8 describes the OVERLAY function defaults:
Table C-8 OVERLAY Function Defaults
| Parameters | Description |
|---|---|
|
|
defaults to 1. |
|
|
defaults to length of overlay. |
|
|
defaults to x'00'. |
The target byte-string overlayed as specified.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
Reverse the byte sequence in RAW r from end-to-end. For example, x'0102F3' would be reversed into x'F30201' and 'xyz' would be reversed to 'zyx'. The result length is the same as the input RAW length.
function REVERSE (r IN RAW) RETURN RAW;
where "r" is the RAW value to reverse.
None
A RAW value containing the reverse of the input RAW value.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
SUBSTR extracts a portion of RAW r, starting at byte position pos and including len bytes.
If pos is positive, SUBSTR counts from the beginning of r to find the first byte. If pos is negative, SUBSTR counts backwards from the end of r. If len is not specified, SUBSTR returns all bytes to the end of r.
function SUBSTR (r IN RAW,
pos IN BINARY_INTEGER,
len BINARY_INTEGER DEFAULT NULL) RETURN RAW;
Where Table C-9 describes the parameters in this function:
Table C-9 SUBSTR Function Parameters
| Parameters | Description |
|---|---|
|
|
is the RAW byte-string from which a portion is to be extracted. |
|
|
is the byte position from which to start extraction. This value cannot be zero. If this value is negative, SUBSTR counts backwards from the end of |
|
|
is the number of bytes from |
Defaults to the length of position pos to the end of r.
The portion of r beginning at pos for len bytes. Or a null value if r is null.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
TRANSLATE returns the RAW r after changing the bytes in from_set according to bytes in to_set.
Successive bytes in r are looked up in from_set and if found, the byte at the same offset in to_set is copied to the result or omitted from the result if the offset exceeds the length of to_set. Bytes that appear in r but not in from_set are copied to the result. Only the first (leftmost) occurrence of a byte in from_set is used and subsequent duplicate occurrences are ignored.
If from_set contains more bytes than to_set, the extra bytes at the end of from_set have no corresponding bytes in to_set. Any bytes in r matching such uncorresponded from_set bytes are omitted from the resulting RAW value.
TRANSLATE differs from TRANSLITERATE in the following ways:
translation RAWs have no defaults
r bytes undefined in the to_set translation RAW are omitted
resulting RAW value can be shorter than the input RAW value
function TRANSLATE (r IN RAW, from_set IN RAW, to_set IN RAW) RETURN RAW;
Table C-10 describes the parameters in this function:
Table C-10 TRANSLATE Function Parameters
| Parameter | Description |
|---|---|
|
|
is the RAW source byte-string to be changed. |
|
|
is the RAW byte-codes to be matched, if present in |
|
|
is the RAW byte-codes to which corresponding |
None
A RAW translated byte-string.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
TRANSLITERATE returns the RAW r after replacing all occurrences of any bytes in from_set with the corresponding bytes in to_set.
Successive bytes in r are looked up in from_set and, if not found, are copied unaltered to the resulting RAW value. If found, they are replaced in the resulting RAW value by either the byte at the same offset in to_set, or the pad byte when the offset exceeds the to_set length. Bytes found in r but not found in from_set are copied to the result. Only the first (leftmost) occurrence of a byte infrom_set is used; subsequent duplicate occurrences are ignored. The result of TRANSLITERATE is always the same length as RAW r.
If to_set is shorter than from_set, then the pad byte is placed in the resulting RAW value when a selected from_set byte has no corresponding byte in to_set.
TRANSLITERATE differs from TRANSLATE in the following ways:
r bytes undefined in to_set are padded
the resulting RAW value is always the same length as the input RAW value
function TRANSLITERATE (r IN RAW, to_set IN RAW DEFAULT NULL, from_set IN RAW DEFAULT NULL, pad IN RAW DEFAULT NULL) RETURN RAW;
Where Table C-11 describes the parameters in this function:
Table C-11 TRANSLITERATE Syntax
| Item | Description |
|---|---|
|
|
is the RAW source byte-string to be changed. |
|
|
is the RAW byte-codes to which corresponding |
|
|
is the RAW byte-codes to be matched, if present in |
|
|
is a 1 byte value used when |
Table C-12 describes the TRANSLITERATE function defaults:
Table C-12 Transliterate Function Defaults
| Parameter | Description |
|---|---|
|
|
defaults to a null value, and effectively extended with |
|
|
defaults to x'00 through x'ff'. |
|
|
defaults to x'00'. |
A RAW transliterated byte-string.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
XRANGE returns a RAW containing all valid 1-byte encodings in succession beginning with the value start_byte and ending with the value end_byte.
If start_byte is greater than end_byte, the succession of result bytes begin with start_byte, wrap from x'ff' to x'00', and end at end_byte.
If specified, start_byte and end_byte must be single-byte RAW values.
function XRANGE (start_byte IN RAW DEFAULT NULL, end_byte IN RAW DEFAULT NULL) RETURN RAW;
Where Table C-13 describes the parameters in this function:
Table C-13 XRANGE Function Parameters
| Parameter | Description |
|---|---|
|
|
is the 1-byte beginning byte-code value of the resulting sequence. |
|
|
is the 1-byte ending byte-code value of the resulting sequence. |
Where Table C-14 describes the XRANGE function defaults:
Table C-14 XRANGE Function Defaults
| Parameters | Description |
|---|---|
|
|
defaults to x'00'. |
|
|
defaults to x'ff'. |
A RAW value containing a succession of 1-byte hexadecimal encodings.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
The UTL_PG package is an extension to PL/SQL that provides a full set of functions for converting COBOL number formats into Oracle numbers and Oracle numbers into COBOL number formats.
UTL_PG conversion format RAWs are not portable in this release. Additionally, generation of conversion format RAWs on one system and transfer to another system is not supported.
The functions listed in this section are called in the standard PL/SQL manner:
package_name.function_name(arguments)
Specifically for UTL_PG routines, this is:
UTL_PG.function_name(arguments)
For each function listed below, the function name, arguments and their datatypes, and the return value datatype are provided. Unless otherwise specified, the parameters are IN, not OUT, parameters.
The following UTL_PG functions share several similar parameters among themselves:
RAW_TO_NUMBER
MAKE_NUMBER_TO_RAW_FORMAT
MAKE_RAW_TO_NUMBER_FORMAT
NUMBER_TO_RAW
These similar parameters are described in detail in Table C-15 and then referenced only by name in subsequent tables listing the parameters for each UTL_PG function in this Appendix.
Table C-15 describes the input parameters that are common to all of the UTL_PG functions:
Table C-15 Input Parameters Common to UTL_PG Function
| Parameter | Description |
|---|---|
|
is the compiler datatype mask. This is the datatype to be converted, specified in the source language of the named compiler ( |
|
|
is the compiler datatype mask options or NULL. These are additional options associated with the mask, as allowed or required, and are specified in the source language of |
|
|
is the compiler environment clause or NULL. These are additional options associated with the environment in which the remote data resides, as allowed or required, and is specified in the source language of compname. This parameter typically supplies aspects of data conversion dictated by customer standards, such as decimal point or currency symbols if applicable. |
|
|
is the compiler name. The only supported value is IBMVSCOBOLII. |
|
|
is the compiler options or NULL. |
|
|
is the zoned decimal code page specified in Oracle NLS format, |
|
|
is the warning indicator. A Boolean indicator which controls whether conversion warning messages are to be returned in the wmsgblk OUT parameter. |
|
|
is the warning message block declared size in bytes. It is a BINARY_INTEGER set to the byte length of |
Table C-16 describes the output parameter that is common to the UTL_PG functions:
Table C-16 Output Parameters Common to UTL_PG Functions
| Parameter | Description |
|---|---|
|
is the warning message block. It is a RAW value which can contain multiple warnings in both full message and substituted parameter formats, if If |
RAW_TO_NUMBER converts a RAW byte-string r from the remote host internal format specified by mask, maskopts, envrnmnt, compname, compopts, and nlslang into an Oracle number.
Warnings are issued, if enabled, when the conversion specified conflicts with the conversion implied by the data or when conflicting format specifications are supplied.
For detailed information about the mask, maskopts, envrnmnt, compname, and compopts arguments, refer to "NUMBER_TO_RAW and RAW_TO_NUMBER Argument Values".
function RAW_TO_NUMBER (r IN RAW, mask IN VARCHAR2, maskopts IN VARCHAR2, envrnmnt IN VARCHAR2, compname IN VARCHAR2, compopts IN VARCHAR2, nlslang IN VARCHAR2, wind IN BOOLEAN, wmsgbsiz IN BINARY_INTEGER, wmsgblk OUT RAW) RETURN NUMBER;
Where Table C-17 describes the parameters in this function:
Table C-17 RAW_TO_NUMBER Function Parameters
| Parameter | Description |
|---|---|
|
|
is the remote host data to be converted. |
|
|
is the compiler datatype mask. |
|
|
are the compiler datatype mask options or NULL. |
|
|
is the compiler environment clause or NULL. |
|
|
is the compiler name. |
|
|
are the compiler options or NULL. |
|
|
is the zoned decimal code page in Oracle NLS format. |
|
|
is a warning indicator. |
|
|
is the warning message block size in bytes. |
|
|
is the warning message block. This is an OUT parameter. |
Defaults and Optional Parameters
Table C-18 describes the default and optional parameters of the RAW_TO_NUMBER function:
Table C-18 Optional and Default Parameters of the RAW_TO_NUMBER Function
| Parameters | Description |
|---|---|
|
|
null allowed, no default value |
|
|
null allowed, no default value |
|
|
null allowed, no default value |
An Oracle number corresponding in value to r.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
NUMBER_TO_RAW converts an Oracle number n of declared precision and scale into a RAW byte-string in the remote host internal format specified by mask, maskopts, envrnmnt, compname, compopts, and nlslang.
Warnings are issued, if enabled, when the conversion specified conflicts with the conversion implied by the data or when conflicting format specifications are supplied.
For detailed information about the mask, maskopts, envrnmnt, compname, and compopts arguments, refer to"NUMBER_TO_RAW and RAW_TO_NUMBER Argument Values".
function NUMBER_TO_RAW (n IN NUMBER, mask IN VARCHAR2, maskopts IN VARCHAR2, envrnmnt IN VARCHAR2, compname IN VARCHAR2, compopts IN VARCHAR2, nlslang IN VARCHAR2, wind IN BOOLEAN, wmsgbsiz IN BINARY_INTEGER, wmsgblk OUT RAW) RETURN RAW;
Where Table C-19 describes the parameters in this function:
Table C-19 NUMBER_TO_RAW Function Parameters
| Parameter | Description |
|---|---|
|
|
is the Oracle number to be converted. |
|
|
is the compiler datatype mask. |
|
|
are the compiler datatype mask options or NULL. |
|
|
is the compiler environment clause or NULL. |
|
|
is the compiler name. |
|
|
are the compiler options or NULL. |
|
|
is the zoned decimal code page in Oracle NLS format. |
|
|
is a warning indicator |
|
|
is the warning message block size in bytes. |
|
|
is the warning message block. This is an OUT parameter. |
Defaults and Optional Parameters
Table C-20 describes the defaults and optional parameters for the NUMBER_TO_RAW function:
Table C-20 Defaults and Optional Parameters for NUMBER_TO_RAW Function
| Parameter | Description |
|---|---|
|
|
null allowed, no default value |
|
|
null allowed, no default value |
|
|
null allowed, no default value |
A RAW value corresponding in value to n.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
MAKE_RAW_TO_NUMBER_FORMAT makes a RAW_TO_NUMBER format conversion specification used to convert a RAW byte-string from the remote host internal format specified by mask, maskopts, envrnmnt, compname, compopts, and nlslang into an Oracle number of comparable precision and scale.
Warnings are issued, if enabled, when the conversion specified conflicts with the conversion implied by the data or when conflicting format specifications are supplied.
This function returns a RAW value containing the conversion format which can be passed to UTL_PG.RAW_TO_NUMBER_FORMAT.
For detailed information about the mask, maskopts, envrnmnt, compname, and compopts arguments, refer to "NUMBER_TO_RAW and RAW_TO_NUMBER Argument Values".
function MAKE_RAW_TO_NUMBER_FORMAT (mask IN VARCHAR2, maskopts IN VARCHAR2, envrnmnt IN VARCHAR2, compname IN VARCHAR2, compopts IN VARCHAR2, nlslang IN VARCHAR2, wind IN BOOLEAN, wmsgbsiz IN BINARY_INTEGER, wmsgblk OUT RAW) RETURN RAW;
Where Table C-21 describes the parameters in this function:
Table C-21 MAKE_RAW_TO_NUMBER_FORMAT Function Parameters
| Parameter | Description |
|---|---|
|
|
is the compiler datatype mask. |
|
|
are the compiler datatype mask options or NULL. |
|
|
is the compiler environment clause or NULL. |
|
|
is the compiler name. |
|
|
are the compiler options or NULL. |
|
|
is the zoned decimal code page in Oracle NLS format. |
|
|
is a warning indicator. |
|
|
is the warning message block size in bytes. |
|
|
is the warning message block. This is an OUT parameter. |
Defaults and Optional Parameters
Table C-22 describes the defaults and optional parameters of the MAKE_RAW_TO_NUMBER_FORMAT function:
Table C-22 Default and Optional MAKE_RAW_TO_NUMBER_FORMAT Parameters
| Parameter | Description |
|---|---|
|
|
null allowed, no default value |
|
|
null allowed, no default value |
|
|
null allowed, no default value |
A RAW(2048) format conversion specification for RAW_TO_NUMBER.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
MAKE_NUMBER_TO_RAW_FORMAT makes a NUMBER_TO_RAW format conversion specification used to convert an Oracle number of declared precision and scale to a RAW byte-string in the remote host internal format specified by mask, maskopts, envrnmnt, compname, compopts, and nlslang.
Warnings are issued, if enabled, when the conversion specified conflicts with the conversion implied by the data or when conflicting format specifications are supplied.
This function returns a RAW value containing the conversion format which can be passed to UTL_PG.NUMBER_TO_RAW_FORMAT. The implementation length of the result format RAW is 2048 bytes.
For detailed information about the mask, maskopts, envrnmnt, compname, and compopts arguments, refer to "NUMBER_TO_RAW and RAW_TO_NUMBER Argument Values".
function MAKE_NUMBER_TO_RAW_FORMAT (mask IN VARCHAR2, maskopts IN VARCHAR2, envrnmnt IN VARCHAR2, compname IN VARCHAR2, compopts IN VARCHAR2, nlslang IN VARCHAR2, wind IN BOOLEAN, wmsgbsiz IN BINARY_INTEGER, wmsgblk OUT RAW) RETURN RAW;
Where Table C-23 describes the parameters in this function:
Table C-23 MAKE_NUMBER_TO_RAW_FORMAT Function Parameters
| Parameter | Description |
|---|---|
|
|
is the compiler datatype mask. |
|
|
are the compiler datatype mask options or NULL. |
|
|
is the compiler environment clause or NULL. |
|
|
is the compiler name. |
|
|
are the compiler options or NULL. |
|
|
is the zoned decimal code page in Oracle NLS format. |
|
|
is a warning indicator |
|
|
is the warning message block size in bytes. |
|
|
is the warning message block. This is an OUT parameter. |
Defaults and Optional Parameters
Table C-24 describes the defaults and optional parameters for the MAKE_NUMBER_TO_RAW_FORMAT function:
Table C-24 Optional, Default Parameters: MAKE_NUMBER_TO_RAW_FORMAT
| Parameter | Description |
|---|---|
|
|
null allowed, no default value |
|
|
null allowed, no default value |
|
|
null allowed, no default value |
A RAW(2048) format conversion specification for NUMBER_TO_RAW.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
RAW_TO_NUMBER_FORMAT converts, according to the RAW_TO_NUMBER conversion format r2nfmt, a RAW byte-string rawval in the remote host internal format into an Oracle number.
function RAW_TO_NUMBER_FORMAT (rawval IN RAW, r2nfmt IN RAW) RETURN NUMBER;
where Table C-25 describes the parameters in this function:
Table C-25 RAW_TO_NUMBER_FORMAT Function Parameters
| Parameter | Description |
|---|---|
|
|
is the remote host data to be converted. |
|
|
is a RAW(2048) format specification returned from MAKE_RAW_TO_NUMBER_FORMAT. |
None
An Oracle number corresponding in value to r.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
NUMBER_TO_RAW_FORMAT converts, according to the NUMBER_TO_RAW conversion format n2rfmt, an Oracle number numval of declared precision and scale into a RAW byte-string in the remote host internal format.
function NUMBER_TO_RAW_FORMAT (numval IN NUMBER, n2rfmt IN RAW) RETURN RAW;
Where Table C-26 describes the parameters in this function:
Table C-26 NUMBER_TO_RAW_FORMAT Function Parameters
| Parameters | Description |
|---|---|
|
|
is the Oracle number to be converted. |
|
|
is a RAW(2048) format specification returned from MAKE_NUMBER_TO_RAW_FORMAT. |
None
A RAW value corresponding in value to n.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
WMSGCNT tests a wmsgblk to determine how many warnings, if any, are present.
function WMSGCNT (wmsgblk IN RAW) RETURN BINARY_INTEGER;
Where Table C-27 describes the parameter in this function.
Table C-27 WMSGCNT Function Parameter
| Parameter | Description |
|---|---|
|
|
is the warning message block returned from one of the following functions:
|
None
A BINARY_INTEGER value equal to the count of warnings present in the RAW wmsgblk.
Table C-28 lists possible returned values:
Table C-28 WMSGCNT Return Values
| Description | |
|---|---|
|
|
indicates a count of warnings present in |
|
|
indicates that no warnings are present in |
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
WMSG extracts a warning message specified by wmsgitem from wmsgblk.
function WMSG (wmsgblk IN RAW, wmsgitem IN BINARY_INTEGER, wmsgno OUT BINARY_INTEGER, wmsgtext OUT VARCHAR2, wmsgfill OUT VARCHAR2) RETURN BINARY_INTEGER;
Where Table C-29 describes the parameters in this function:
Table C-29 WMSG Function Parameters
| Parameter | Description |
|---|---|
|
|
is a RAW warning message block returned from one of the following functions:
|
|
|
is a BINARY_INTEGER value specifying which warning message to extract, numbered from 0 for the first warning through |
|
|
is an OUT parameter containing the BINARY_INTEGER (hexadecimal) value of the warning number. This value, after conversion to decimal, is documented in the Oracle Database 10g Error Messages manual. |
|
|
is a VARCHAR2 OUT parameter value containing the fully-formatted warning message in ORA-xxxxx format, where xxxxx is the decimal warning number documented in the Oracle Database 10g Error Messages manual. |
|
|
is a VARCHAR2 OUT parameter value containing the list of warning message parameters to be substituted into a warning message in the following format: warnparm1;;warnparm2;;...;;warnparmn where each warning parameter is delimited by a double semicolon. |
None
A BINARY_INTEGER value containing a status return code.
A return code of "0" indicates that wmsgno, wmsgtext, and wmsgfill are assigned and valid.
If you receive an ORA-xxxx error or warning message, refer to the Oracle Database Error Messages guide for an explanation and information about how to handle it.
Table C-30 describes the error messages you could receive:
Table C-30 WMSG Function Errors
| Error | Description |
|---|---|
|
|
indicating the warning specified by |
|
|
indicating an invalid message block. |
|
|
indicating |
|
|
indicating there are too many substituted warning parameters. |
This table lists the valid values for the format arguments for NUMBER_TO_RAW and RAW_TO_NUMBER and related functions. Following are examples of some valid COBOL picture masks. Any valid COBOL picture mask may be used. Refer to the appropriate IBM COBOL programming guides for an explanation of COBOL picture masks.
mask: COBOL picture mask PIC 9(n) where 1 <= n <= 18 PIC S9(n) where 1 <= n <= 18 PIC 9(n)V9(s) where 1 <= n+s <= 18 PIC S9(n)V9(s) where 1 <= n+s <= 18 PIC S9999999V99 PIC V99999 PIC SV9(5) PIC 999.00 PIC 99/99/99 PIC ZZZ.99 PIC PPP99 PIC +999.99 PIC 999.99+ PIC -999.99 PIC 999.99- PIC $$$$$,$$$.99 PIC $9999.99DB PIC $9999.99CR maskopts: COBOL picture mask options COMP USAGE IS COMP USAGE IS COMPUTATIONAL COMP-3 USAGE IS COMP-3 USAGE IS COMPUTATIONAL-3 COMP-4 USAGE IS COMP-4 USAGE IS COMPUTATIONAL-4 DISPLAY USAGE IS DISPLAY SIGN IS LEADING SIGN IS LEADING SEPARATE SIGN IS LEADING SEPARATE CHARACTER SIGN IS TRAILING SIGN IS TRAILING SEPARATE SIGN IS TRAILING SEPARATE CHARACTER envrnmnt: COBOL environment clause CURRENCY SIGN IS x where x is a valid currency sign character DECIMAL-POINT IS COMMA compname: COBOL compiler name IBMVSCOBOLII compopts: COBOL compiler options (no values are supported at this time)
|
 Copyright © 1996, 2005, Oracle. All rights reserved. Legal Notices |
|