A Oracle Error Messages for BS2000/OSD

This appendix lists the messages of Oracle Database 10g release 2 (10.2) for Fujitsu Siemens Computers BS2000/OSD together with possible causes and suggested actions. The messages shown in this chapter may be accompanied by additional text when displayed on screen. This text identifies the function that detects the problem, and can include internal status codes, or BS2000 system macro return codes, or both. These codes will help your Oracle Support Services Representative in determining the cause of a problem.

Sometimes, for example in the early stages of initialization when the message components are not available, the Oracle Database cannot issue a regular Oracle message. If this occurs, then the Oracle Database calls the ILCS task termination routine, or it issues a TERM macro directly, giving the message number as the user termination code. You can use this message number to find the explanation in this appendix.

ORA-05000: ORACLE termination routine called: Cause: The termination routine of the Oracle Database run-time system has been called due to a fatal error.; Action: If you do not know why the Oracle Database program terminated, or how to resolve this problem, then contact your Oracle Support Services Representative.

ORA-05001: Unsupported BS2000 Version: Cause: The active version of the BS2000/OSD operating system is not supported by Oracle Database 10g release 2 (10.2).; Action: Upgrade to a more recent BS2000/OSD version.

ORA-05002: Fatal error: called from non-ILCS program: Cause: In a precompiler or OCI application, the Oracle Database is called from a program that does not run in an ILCS environment. The Oracle Database does not support non-ILCS programs.; Action: Make sure that your application program runs in ILCS mode. Some programming languages (for example, FOR1, PL/I) require specific options for ILCS. Refer to the Fujitsu Siemens Computers documentation for further information.

ORA-05003: Fatal error: ILCS PCD cannot be verified: Cause: In a precompiler or OCI application, the Oracle Database is called with a save area that is marked as an ILCS save area but does not point to a proper PCD (ILCS global area). The problem is either that memory has been overwritten, or that. the Oracle Database is called from a program that does not run in an ILCS environment. The Oracle Database does not support non-ILCS programs.; Action: Make sure that your application program runs in ILCS mode. Some programming languages (for example, FOR1, PL/I) require specific options for ILCS. Refer to the Fujitsu Siemens Computers documentation for further information.

ORA-05004: Fatal error: stack overflow, extension failed: Cause: A call to a function required an extension of the current call stack segment. This extension failed (the corresponding ILCS routine returned the error).; Action: Make sure that the user address space is large enough (in the JOIN entry) and that there is no temporary memory saturation. Then re-run the program. If you need further help, then contact your Oracle Support Services Representative.

ORA-05005: Error: IT0INITS called in PROLOD: Cause: This is an internal error and should not occur.; Action: Contact your Oracle Support Services Representative.

ORA-05006: Error: sltga already initialized: Cause: The initialization routine for the sltga is called more than one time.; Action: Check if more than one stub module (PROSTUB, XAOSTUB) is linked to the application.

ORA-05007: failed to load OSNTAB: Cause: This message will normally be preceded by a BS2000 BLS-nnnn message. The most likely reason is that the ORALOAD library cannot be found.; Action: Contact your database administrator about the ORALOAD library. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05008: failed to load requested network driver: Cause: This message will be normally preceded by a BS2000 BLS-nnnn message. The most likely reason is that the ORALOAD library cannot be found.; Action: Contact your database administrator about the ORALOAD library. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05009: osnsgl: user connects invalid in kernel: Cause: A database link was set up using the single-task driver (S:). This is invalid, as the single-task driver can only be used for call connections on the user side.; Action: Select a different network driver for the database link.

ORA-05010: bad filename length: Cause: Buffer overflow while building/translating a file name. This could be caused by specifying an excessively long file name in the ORAENV file.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05011: bad file size: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05012: bad block size: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05013: bad filename parse: Cause: A file name being analysed is not well-formed for Oracle Database purposes.; Action: Correct the file name and re-run the program.

ORA-05014: sfcopy: non-matching block size: Cause: In a partial database file copy, source and target file have different blocksizes. This may indicate an internal error and should not normally occur.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05015: text file open failed: Cause: An Oracle Database text or command file cannot be opened. Either the file name is wrong, the file has not been properly initialized, or the file is not accessible.; Action: Correct the problem and restart the Oracle Database. If this occurred when you issued the STARTUP command, then check the initialization file for the correct specification of the database files.

ORA-05016: text file close failed: Cause: Attempt to close an Oracle Database file has failed. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05017: file open failed: Cause: An Oracle Database database file cannot be opened. Either the file name is wrong, the file has not been properly initialized, or the file is not accessible (for example a file may not be accessible for a cross-user ID single-task client).; Action: Correct the problem and restart the Oracle Database. If this occurred when you issued the STARTUP command, then check the initialization file for the correct specification of the database files.

ORA-05018: file seek failed: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05019: file write failed: Cause: An I/O error occurred while writing to an Oracle Database file.; Action: If the error cannot be identified as one caused by a disk malfunction, then either contact the System Administrator, or contact your Oracle Support Services Representative.

ORA-05020: write block outside of file: Cause: An attempt was made to write a block of an Oracle Database file that does not exist. For example, block number < 1 or > file size. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05021: file read failed: Cause: An I/O occurred while reading an Oracle Database file.; Action: If the error cannot be identified as one caused by a disk malfunction, then either contact the System Administrator, or contact your Oracle Support Services Representative.

ORA-05022: read block outside of file: Cause: An attempt was made to read a block of an Oracle Database file that does not exist (block number < 1 or > file size). This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05023: file close failed: Cause: The attempt to close an Oracle Database file failed. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05025: sfccf:file mismatch. Trying to reuse a file with different size: Cause: When trying to reuse a database file, the file size specified differs from the actual size of the existing file.; Action: Specify the correct file size (remember to subtract one logical block for the implicit header block), or leave the size unspecified, or use a different file name if you want to create a larger or smaller database file.

ORA-05026: file does not exist: Cause: An attempt was made to access a database file which no longer exists.; Action: Contact your database administrator who may know why this error has occurred. If your database administrator cannot find the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05027: file does exist: Cause: When attempting to create a new file, the file is found to exist and not be empty.; Action: If the error occurred in a create database, then retry with the reuse option. Otherwise use a different file name or check whether the file can be erased.

ORA-05028: file is not a dbfile: Cause: The database (or log, or control) file to be opened does not contain the proper identification for such a file.; Action: Check for wrong file specification.

ORA-05029: illegal use-option: Cause: Internal error. Function sfccf was called with an illegal option.; Action: Contact your Oracle Support Services Representative.

ORA-05030: SID not defined: Cause: When the system identification was required (typically, to substitute the "?" in names, for example, in file names set by the initialization file), it was not yet defined. This could be caused by a missing ORAENV file or a missing ORASID in that file.; Action: Ensure that the ORAENV file definition is correct and re-run the program.

ORA-05031: SID translation failure: Cause: The system identification is syntactically incorrect.; Action: Ensure that the ORASID definition is correct and re-run the program.

ORA-05032: bad name parse: Cause: The translation of a file name, or other name containing variable parts, failed. The error may be caused by a wrong specification in the ORAENV file.; Action: Ensure that the ORAENV variable assignments are correct. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05033: bad environment values: Cause: One or more of the values specified in the ORAENV file are invalid.; Action: Ensure that you specified legal values in the ORAENV file (Refer to Appendix B, "ORAENV Variables" for further information).

ORA-05034: bad seal: Cause: Internal error. An internal file control structure is found to be corrupt.; Action: Contact your Oracle Support Services Representative.

ORA-05035: host command not executed: Cause: A BS2000 command, argument of a HOST or #HOST command, is invalid or too long.; Action: Enter a valid HOST command.

ORA-05036: bad user id (length): Cause: Internal buffer overflow while building a file name from variable components.; Action: Ensure that the ORAUID value specified in the ORAENV file is correct. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05037: /CANCEL command not executed: Cause: A background job could not be cancelled. The background task may have already been terminated.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05038: SID has illegal length: Cause: The system identifier specified in either the ORAENV file or as part of a connect string exceeds 4 characters in length.; Action: Specify a correct value.

ORA-05039: Recursive entry to ssodrv: Cause: The Oracle Database kernel has been re-entered at the top. This should not happen.; Action: Make sure that your user program does not incorrectly call Oracle Database functions from within an interrupt handling routine (signal routine, contingency). If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05040: no more dynamic memory: Cause: Request memory failed in file-management components. This is probably caused by a user address space that is too small.; Action: Make sure that the user address space is large enough (in the JOIN entry) and that there is no temporary memory saturation. Then re-run the program. If you need further help, then contact your Oracle Support Services Representative.

ORA-05041: Interrupt in soarch: Cause: The archiver process was unexpectedly interrupted.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05042: soarch: Buffer overflow: Cause: The archiver process detected an internal buffer overflow.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05043: Archive control string too long: Cause: The archive control string is too long.; Action: Shorten this parameter and restart the database.

ORA-05044: Archive generated filename too long: Cause: The file name is generated from the values of the initialization parameters log_archive_format and log_archive_dest. This has resulted in a file name that is too long.; Action: Issue the command ALTER SYSTEM ARCHIVE LOG START TO VALID_DEST where VALID_DEST is a valid BS2000 file name.

ORA-05045: Archive file creation/open error: Cause: The archive file is normally allocated dynamically. Either this or the subsequent open failed. Possible causes are either insufficient space left on disk, or a bad archive file allocation parameter in ORAENV .; Action: Make sure that the optional ORAENV parameter is correct and that sufficient disk space is available.

ORA-05046: Archive control string error: Cause: The archive file name or control parameters are incorrect.; Action: Correct the parameters.

ORA-05050: PGA (fixed part) could not be allocated: Cause: Probable operating system error or internal error.; Action: Contact your Oracle Support Services Representative.

ORA-05051: cannot allocate var. PGA: Cause: During creation of the PGA, required dynamic memory could not be allocated.; Action: Verify that the user address space is large enough and that if an application program produced the error, the program is not consuming excessive memory. Otherwise contact your Oracle Support Services Representative.

ORA-05052: error deleting var. PGA: Cause: During deletion of the PGA, dynamic memory could not be released. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05053: invalid or missing PGA_BASE: Cause: An invalid value for the PGA_BASE parameter has been specified in the DBA ORAENV file.; Action: Specify a correct value.

ORA-05054: invalid or missing PGA_SIZE: Cause: An invalid value for the PGA_SIZE environment variable has been specified in the DBA ORAENV file. You should never change the default value for the PGA_SIZE environment variable.; Action: Use the default value for the PGA_SIZE environment variable. If this does not solve the problem, then contact your Oracle Support Services Representative.

ORA-05055: address range for PGA (fixed part) is not free: Cause: The address range described by the PGA_BASE and PGA_SIZE ORAENV variables is not available for allocation. This may be due to overlapping PGA, SGA, and KERNEL areas, or to an application program which has occupied memory in this area. If you did not specify a value for PGA_BASE, then the default may be inappropriate for your case.; Action: Refer to the section "Address Space Planning" in the "Oracle Database System Architecture and Implementation" chapter of the Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD for further information.

ORA-05056: no more context space: Cause: During processing of a SQL request, dynamic memory could not be allocated. This could happen when very complex requests are being processed and there is not enough memory available.; Action: Verify that the user address space is large enough and that your application program (if the error occurred when you were using an application program) is not using excessive memory. Otherwise, contact your Oracle Support Services Representative.

ORA-05058: assert failed: SGA not mapped: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05059: assert failed: not in kernel: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05060: SGA not created: Cause: After you issued the STARTUP command, the SGA shared memory pool could not be created.; Action: Verify that you are not trying to start the database while it is running and that the database system identification is not being used for two different databases. Otherwise, contact your Oracle Support Services Representative.

ORA-05061: SGA attach failed: Cause: Connection to the SGA shared memory pool could not be established. This may have happened if you used the wrong system identification, or if the database you expected to be running is not running.; Action: Verify that it is not one of the preceding causes (check with your database administrator). Otherwise, contact your Oracle Support Services Representative.

ORA-05063: SGA base invalid: Cause: An invalid value has been specified for the SGA_BASE parameter in the ORAENV file.; Action: This value is not normally needed. If specified, it must be a hexadecimal value giving the full virtual address for the SGA memory pool. Correct the value and re-issue the STARTUP command.

ORA-05064: cannot allocate SGA: Cause: After creating the memory pool, the REQMP to allocate the space failed. Probable operating system error.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05065: SGA not deleted: Cause: When attempting to detach from the SGA, the DISMP system macro returned an error.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05066: SGA address space conflict: Cause: The SGA cannot be placed at the requested address range, because the range is already partly used. The SGA start address is defined by the ORAENV variable, SGA_BASE; its size is determined by various initialization file parameters such as processes, buffers, and so on.; Action: Refer to the section on "Address Space Planning" in the chapter "Oracle Database System Architecture and Implementation" of the Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD , and adjust the relevant initialization file and ORAENV variables. Inspect the JOIN entry for your address space limit. Contact your System Administrator to find out about shared subsystems and their placement in the address space. Make sure that you do not overlap with the Oracle Database kernel.

ORA-05067: SGA: address space saturation: Cause: When the SGA is being allocated, the operating system reported that the virtual address space is saturated.; Action: Contact your System Administrator about paging area size and current overall system load.

ORA-05068 SGA still active, should not be: Cause: When the SGA is being created during startup, it is found that the SGA memory pool is still in use (although the databases should be shut down). This may be caused by a hanging single-task, user task or a network server task.; Action: Check for such hanging tasks. Cancel these tasks, then restart the database.

ORA-05069: Unexpected SGA memory pool problem: Cause: The ENAMP macro returned an unexpected error code.; Action: Contact your Oracle Support Services Representative.

ORA-05070: cannot enable TPA ser.item: Cause: Probable operating system error.; Action: Contact your Oracle Support Services Representative.

ORA-05071: cannot ENQ on TPA ser.item: Cause: Probable operating system error.; Action: Contact your Oracle Support Services Representative.

ORA-05072: cannot enable post/wait item: Cause: Probable operating system error.; Action: Contact your Oracle Support Services Representative.

ORA-05073: error in post: Cause: An interprocess communication operation failed.; Action: Check that the database and all required background tasks are running correctly. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05074: error in wait: Cause: An interprocess communication operation failed.; Action: Check that the database and all required background tasks are running correctly. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05075: error in task table manager: Cause: Internal error.; Action: Contact your Oracle Support Services Representative.

ORA-05076: error setting spid: Cause: Probable operating system error.; Action: Contact your Oracle Support Services Representative.

ORA-05077: cannot enable HIA event: Cause: Probable operating system error. The HIA (Here I Am) event item is used during startup to communicate between a started background task and the starting SQL*DBA program.; Action: Contact your Oracle Support Services Representative.

ORA-05078: create process failure: Cause: When you issued the STARTUP command, a background job could not be started successfully.; Action: Check for any job scheduling problems and that any BGJPAR entry in the ORAENV file is correct. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05079: internal asynchronous IO error: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05101: bind-error xxxxxxxx for module/library: Cause: The Oracle Database/UTM attach module could not be loaded. One possible reason is that the Oracle Database has been installed under a user ID different from $ORAC1020 and that the installation procedure has not executed correctly.; Action: Ensure that the ORAUID definition in the ORAENV file is correct. Otherwise, contact your Oracle Support Services Representative.

ORA-05102: module verification failure: ORADBCN@: Cause: The UTM application has probably been link-edited with an Oracle Database version different from the Oracle Database version used at execution.; Action: Re-link the UTM application. If the error persists, then contact your Oracle Support Services Representative.

ORA-05103: generated TSKM too short: Cause: The TSKM area was overwritten by the Oracle Database.; Action: Change the parameter LTHTSKM in the KDCDB/KDCDBO macro.

ORA-05104: generated TAM too short: Cause: The TAM area was overwritten by the Oracle Database.; Action: Change the parameter LTHTAM in the KDCDB/KDCDBO macro.

ORA-05107: POSIX environment variable <variablename> not defined: Cause: The specified environment variable is not defined.; Action: Define and export the requested variable in your profile.

ORA-05108: failed to process BS2000 command <bs2-command>: Cause: The BS2000 command processor cannot run the command.; Action: Test the logged command in the POSIX shell using the POSIX command, bs2cmd.

ORA-05109: failed to initialize environment for POSIX: Cause: An application running under the POSIX shell cannot create links to required files in the BS2000 file system.; Action: Check if the environment variables required for Oracle applications under POSIX are set properly.

ORA-05110: cannot attach to memory pool: Cause: Invalid pool ID parameter xxx_MPID or operating system error.; Action: Check the ORAENV parameter xxx_MPID (at most 4 characters of the set [A...Z],[0...9]) or contact your Oracle Support Services Representative.

ORA-05111: error attaching to memory pool: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05112: error creating memory pool: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05114: bad pool base: Cause: An invalid value for the base address parameter of the shared pool, such as, COM_BASE has been specified in the ORAENV file.; Action: If this value is specified, then it must be a hexadecimal value giving the full virtual address for the base address of a memory pool. Correct the value and restart the database.

ORA-05116: cannot load shared code into pool: Cause: Shared code could not be loaded into the specified memory pool. Generally, this message will be preceded by a BLS-nnnn message from the operating system.; Action: Make sure that the ORALOAD link name identifies the correct ORALOAD library. Then restart the program. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05117: cannot attach to socket subsystem: Cause: An application could not be bound to the sockets subsystem. Generally this message will be preceded by a BLS-nnnn message from the operating system.; Action: Contact your Oracle Support Services Representative.

ORA-05118: ORACLE PCD slot not accessible: Cause: The current task is trying to attach to the ORACLE PCD slot but cannot find this slot. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05119: module verification failed: Cause: The version of the shared loaded module does not match the version of the connection module on the user side.; Action: Contact your Oracle Support Services Representative.

ORA-05120: waiting for shared module to be loaded timed out: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05121: waiting for initialization of shared module timed out: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05126: Missing IT0PCD address: Cause: The ILCS run-time link-library is probably missing.; Action: Contact your System Administrator.

ORA-05127: PARAM-LIST AT CALL ORACLE NOT OK: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05128: COMMIT/ROLLBACK/CONNECT NOT ALLOWED IN UTM-PROGRAM: Cause: Illegal SQL COMMIT/ROLLBACK/CONNECT found in UTM program.; Action: Correct the UTM program accordingly.

ORA-05131: ORADBCO-Call not allowed: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05132: TA for User x is committed by the Resource-Manager: Cause: Transaction has been committed before failing.; Action: None.

ORA-05133: No Connect-String in Startparams found: Cause: In the start parameters there must be at least one open string for the Oracle Database.; Action: Refer to the chapter "UTM Product Set" in the Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD and correct the start parameters.

ORA-05134: DBSTAT secondary opcode inconsistent: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05135: Error x Recover PTC-list, Instance y: Cause: System error.; Action: Check if UTM is correctly installed and select privileges are granted to XA-tables. Refer to the chapter on openUTM, or contact the Oracle Support Services Representative.

ORA-05136: Maximum number of instances exceeded: Cause: The maximum number of open strings in the start parameters has been exceeded.; Action: Refer to the chapter "UTM Product Set" in the Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD and correct the start parameters.

ORA-05137: Error x at Open Instance y: Cause: The connection to instance y is not possible.; Action: Start the Instance with all the required servers. If the error persists, then contact your Oracle Support Services Representative.

ORA-05138: Error x at Close Instancey: Cause: Error occurred when disconnecting from instance y.; Action: Because the disconnection has just been done, there is no action.

ORA-05139: Error x at Start Transaction for User z, Instance y: Cause: The start of transaction in instance y is invalid.; Action: Restart the UTM transaction. If the error persists, then close the UTM application and do a restart.

ORA-05140: Error x at Continue Transaction for User z, Instance y: Cause: The continuation of transaction in instance y is invalid.; Action: Restart the UTM transaction. If the error persists, and the error is not 'XAER_PROTO' (this means, that the transaction is rolled back because of longlock), then shut down the UTM application and restart.

ORA-05141: Error x at Break Transaction for User z, Instance y: Cause: The break of transaction in instance y is invalid.; Action: Restart the UTM transaction. If the error persists, and there are no cursor operations in the preceded dialog step, then shut down the UTM application and do a restart.

ORA-05142: Error x at End Transaction for User z, Instance y: Cause: The end of a transaction in instance y is invalid.; Action: Restart the UTM transaction. If the error persists, then shut down the UTM application and do a restart.

ORA-05143: Mismatch in TA for User(s) z: Cause: In the UTM warmstart there is a mismatch between openUTM, or between the Oracle Database instance(s), or both.; Action: Clear the Oracle Database instance(s), create new KDCDEF for UTM and restart the UTM application.

ORA-05144: Error x at Prepare Transaction for User z, Instance y: Cause: The preparation for committing a transaction in instance y is invalid.; Action: Restart the UTM transaction. If the error persists, then shutdown the UTM application and do a restart.

ORA-05145: Error x at Commit Transaction for User z, Instance y: Cause: Attempt to commit transaction in instance y unsuccessful.; Action: Restart the UTM transaction. If the error persists, then shutdown the UTM application and restart.

ORA-05146: Error x at Rollback Transaction for User z, Instance y: Cause: The rollback of transaction in instance y is invalid.; Action: No action, but if the error persists, then shutdown the UTM application and restart.

ORA-05147: TA for User z committed; Reason: Recovery: Cause: In a openUTM warmstart an interrupted transaction has been committed.; Action: None.

ORA-05148: TA for User z heuristic rolled back in Instance y: Cause: In a UTM warmstart an interrupted transaction has just been rolled back from the Oracle Database.; Action: Restart the UTM transaction.

ORA-05149: TA for User z rolled back; Reason: Internal Event: Cause: The end- or prepare-call was invalid. Therefore the transaction must be rolled back.; Action: Restart the UTM transaction.

ORA-05150: KDCS-PEND before DBFITA missing: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05151: KDCS-PEND before DBPETA missing: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05152: Linked Resource-Manager is not CAE-compatible: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05153: xa_switch definition not found for specified Resource-Manager: s: Cause: System error.; Action: Contact your Oracle Support Services Representative.

ORA-05154: Syntax error in start parameters for Resource-Manager: s: Cause: In the start parameters for the Oracle Database there is a syntax error.; Action: Refer to the chapter "UTM Product Set" in your Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD and correct the start parameters.

ORA-05155: Internal Error: malloc in dbstpa: Cause: System error (one possible reason: out of memory); Action: Contact your Oracle Support Services Representative.

ORA-05156: Internal Error: realloc in dbstpa: Cause: System error (one possible reason: out of memory); Action: Contact your Oracle Support Services Representative.

ORA-05157: Internal Error: malloc in up_recovery: Cause: This error message indicates a system error. One of the possible reasons for this issue is that the system does not have sufficient memory.; Action: Contact your Oracle Support Services Representative.

ORA-05158: IUTMDB-Function not supported: Cause: openUTM system error.; Action: Contact your Oracle Support Services Representative.

ORA-05159: TA for User(s) z rolled back; Reason: Recovery: Cause: In a openUTM warmstart one or more interrupted transactions have been rolled back.; Action: None.

ORA-05161: TCP/IP can't perform asynchronous test on break socket.: Cause: Select on break socket failed.; Action: Contact your System Administrator about TCP/IP networking problems. If the error persists, then contact your Oracle Support Services Representative.

ORA-05165: function not supported: Cause: Either Oracle Database 10g release 2 (10.2) or BS2000/OSD does not support this function.; Action: None.

ORA-05167: Defect in data buffer: Cause: This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05170: SID not defined (ORAENV file missing?): Cause: The system identifier, data base name, is not defined when needed during Oracle Database program initialization. This could be caused by a missing ORAENV file or a missing ORASID entry in that file.; Action: Ensure that the ORAENV file definition is correct and re-run the program.

ORA-05173: bad kernel size: Cause: An invalid value for the KNL_SIZE parameter has been specified in the ORAENV file.; Action: You should not normally specify this variable, as the default value will be correct. Contact your Oracle Support Services Representative.

ORA-05174: bad kernel base: Cause: An invalid value for the KNL_BASE parameter has been specified in the ORAENV file.; Action: If this value is specified, then it must be a hexadecimal value giving the full virtual address for the kernel memory pool. Correct the value and restart the database.

ORA-05175: Kernel address space conflict: Cause: The Oracle Database kernel cannot be placed at the requested address range, because the range is already used. The kernel start address is defined by the ORAENV parameter, KNL_BASE.; Action: Refer to the section on "Address Space Planning" in the chapter "Oracle Database System Architecture and Implementation" of the Oracle Database Installation and Administration Guide for Fujitsu Siemens BS2000/OSD , and adjust the relevant initialization file and ORAENV parameters. Inspect the JOIN entry for your address space limit. Contact your System Administrator to learn about shared subsystems and their placement in the address space.

ORA-05176: Kernel: address space saturation: Cause: When the Oracle Database kernel memory pool was being allocated, the operating system signalled that the virtual address space is currently saturated.; Action: Contact your System Administrator about paging area size and current overall system load.

ORA-05177: Unexpected Kernel memory pool problem: Cause: The ENAMP macro returned an unexpected error code.; Action: This problem can be caused when you run a program in 24-bit mode and try to connect a single-task to a kernel residing above the 16MB line (because the database itself is running in 31-bit mode). If this is the cause of the error, then you must access the database in two-task mode (through SQL*Net). Refer to the ENAMP macro description in the BS2000 documentation for other possible reasons. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05178: Kernel module not yet initialized: Cause: The current task is trying to attach to an Oracle Database kernel which is not yet completely initialized. This can only happen if you try to connect to a database which is just being started.; Action: Retry after a while. Remember that it may take a few minutes until a database is fully running and ready for the users. If the error persists, then contact your database administrator.

ORA-05180: Cannot load character set table: Cause: One of the modules containing character set tables cannot be loaded.; Action: Verify that the ORALOAD library is accessible through LINK=ORALOAD. For further information on link names and the ORALOAD library, Refer to Chapter 1, " Getting Started" in the User's Guide . If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05181: load/init problem with PRO/OCI interface: Cause: The user-side stub module could not load the PRO/OCI module (in this case, the message will normally be preceded by a BS2000 BLS-nnnn message), or the loaded module is incompatible with the version of the stub module.; Action: Make sure the ORALOAD link name exists and points to the current ORALOAD library. Re-link your application with the current link libraries.

ORA-05191: symbol translation error for kernel memory pool: Cause: The logical name translation for the kernel memory pool failed. Normally, this indicates an invalid system identification, ORASID in the ORAENV file.; Action: Ensure that the ORAENV file definition is correct. Otherwise contact your Oracle Support Services Representative.

ORA-05192: cannot create/attach kernel memory pool: Cause: The memory pool for the Oracle Database kernel code could not be enabled. In a user program, a possible cause is that part of the address range needed for the memory pool is already allocated by the user program.; Action: Ensure that the user program does not request storage excessively, and that any SGA_BASE and KNL_BASE parameters in the ORAENV file are consistent. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05193: Symbol translation error for kernel module or load library: Cause: The logical-name translation for the kernel module or load library failed. This is an internal error and should not normally occur.; Action: Contact your Oracle Support Services Representative.

ORA-05194: cannot load kernel: Cause: The kernel could not be loaded into the kernel memory pool. In most cases, this message is preceded by a BLS-nnn message from the operating system.; Action: Make sure that the ORALOAD link name identifies the correct ORALOAD library, and that the ORAENV variable, KNL_MODULE, names one of the possible kernels. Then re-issue the STARTUP command. If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05195: bad or missing kernel connector: Cause: The loaded kernel could not verify its user-side connector module. This can occur if you use an incorrect kernel version.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05198: associated internal OSD error code %d: Cause: This message precedes ORA-05199 if there is more information available. The first 4 hexadecimal digits can often identify the module; the last 4 hexadecimal digits are usually a condensed version of an associated system macro code. This code can be helpful in diagnosing the problem.; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.

ORA-05199: ORACLE ABNORMAL EXIT: Cause: A fatal error occurred which prevents continuation of execution. In many cases, a preceding message will explain the error. The system will cause the program execution to stop (TERM ABNORMAL with DUMP will be shown).; Action: If you cannot identify the cause of the problem, then contact your Oracle Support Services Representative.