Skip Headers
Oracle® Streams Concepts and Administration
10g Release 2 (10.2)

Part Number B14229-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

10 Preparing a Streams Environment

This chapter provides instructions for preparing a database or a distributed database environment to use Streams.

This chapter contains these topics:

Configuring a Streams Administrator

To manage a Streams environment, either create a new user with the appropriate privileges or grant these privileges to an existing user. You should not use the SYS or SYSTEM user as a Streams administrator, and the Streams administrator should not use the SYSTEM tablespace as its default tablespace.

Complete the following steps to configure a Streams administrator at each database in the environment that will use Streams:

  1. Connect in SQL*Plus as an administrative user who can create users, grant privileges, and create tablespaces. Remain connected as this administrative user for all subsequent steps.

  2. Either create a tablespace for the Streams administrator or use an existing tablespace. For example, the following statement creates a new tablespace for the Streams administrator:

    CREATE TABLESPACE streams_tbs DATAFILE '/usr/oracle/dbs/streams_tbs.dbf' 
      SIZE 25M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;
    
  3. Create a new user to act as the Streams administrator or use an existing user. For example, to create a new user named strmadmin and specify that this user uses the streams_tbs tablespace, run the following statement:

    CREATE USER strmadmin IDENTIFIED BY strmadminpw
       DEFAULT TABLESPACE streams_tbs
       QUOTA UNLIMITED ON streams_tbs;
    

    Note:

    For security purposes, use a password other than strmadminpw for the Streams administrator.
  4. Grant the Streams administrator DBA role:

    GRANT DBA TO strmadmin;
    
  5. Optionally, run the GRANT_ADMIN_PRIVILEGE procedure in the DBMS_STREAMS_AUTH package. You might choose to run this procedure on the Streams administrator created in Step3 if any of the following conditions are true:

    • The Streams administrator will run user-created subprograms that execute subprograms in Oracle-supplied packages associated with Streams. An example is a user-created stored procedure that executes a procedure in the DBMS_STREAMS_ADM package.

    • The Streams administrator will run user-created subprograms that query data dictionary views associated with Streams. An example is a user-created stored procedure that queries the DBA_APPLY_ERROR data dictionary view.

    A user must have explicit EXECUTE privilege on a package to execute a subprogram in the package inside of a user-created subprogram, and a user must have explicit SELECT privilege on a data dictionary view to query the view inside of a user-created subprogram. These privileges cannot be through a role. You can run the GRANT_ADMIN_PRIVILEGE procedure to grant such privileges to the Streams administrator, or you can grant them directly.

    Depending on the parameter settings for the GRANT_ADMIN_PRIVILEGE procedure, it either grants the privileges needed to be a Streams administrator directly, or it generates a script that you can edit and then run to grant these privileges.

    See Also:

    Oracle Database PL/SQL Packages and Types Reference for more information about this procedure

    Use the GRANT_ADMIN_PRIVILEGE procedure to grant privileges directly:

    BEGIN
      DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE(
        grantee          => 'strmadmin',    
        grant_privileges => true);
    END;
    /
    

    Use the GRANT_ADMIN_PRIVILEGE procedure to generate a script:

    1. Use the SQL statement CREATE DIRECTORY to create a directory object for the directory into which you want to generate the script. A directory object is similar to an alias for the directory. For example, to create a directory object called admin_dir for the /usr/admin directory on your computer system, run the following procedure:

      CREATE DIRECTORY admin_dir AS '/usr/admin';
      
    2. Run the GRANT_ADMIN_PRIVILEGE procedure to generate a script named grant_strms_privs.sql and place this script in the /usr/admin directory on your computer system:

      BEGIN
        DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE(
          grantee          => 'strmadmin',    
          grant_privileges => false,
          file_name        => 'grant_strms_privs.sql',
          directory_name   => 'admin_dir');
      END;
      /
      

      Notice that the grant_privileges parameter is set to false so that the procedure does not grant the privileges directly. Also, notice that the directory object created in Step a is specified for the directory_name parameter.

    3. Edit the generated script if necessary and save your changes.

    4. Execute the script in SQL*Plus:

      SET ECHO ON
      SPOOL grant_strms_privs.out
      @/usr/admin/grant_strms_privs.sql
      SPOOL OFF
      
    5. Check the spool file to ensure that all of the grants executed successfully. If there are errors, then edit the script to correct the errors and rerun it.

  6. If necessary, grant the Streams administrator the following privileges:

    • If no apply user is specified for an apply process, then the necessary privileges to perform DML and DDL changes on the apply objects owned by another user. If an apply user is specified, then the apply user must have these privileges.

    • If no apply user is specified for an apply process, then EXECUTE privilege on any PL/SQL procedure owned by another user that is executed by a Streams apply process. These procedures can be used in apply handlers or error handlers. If an apply user is specified, then the apply user must have these privileges.

    • EXECUTE privilege on any PL/SQL function owned by another user that is specified in a custom rule-based transformation for a rule used by a Streams capture process, propagation, apply process, or messaging client. For a capture process, if a capture user is specified, then the capture user must have these privileges. For an apply process, if an apply user is specified, then the apply user must have these privileges.

    • Privileges to alter database objects where appropriate. For example, if the Streams administrator must create a supplemental log group for a table in another schema, then the Streams administrator must have the necessary privileges to alter the table.

    • If the Streams administrator does not own the queue used by a Streams capture process, propagation, apply process, or messaging client, and is not specified as the queue user for the queue when the queue is created, then the Streams administrator must be configured as a secure queue user of the queue if you want the Streams administrator to be able to enqueue messages into or dequeue messages from the queue. The Streams administrator might also need ENQUEUE or DEQUEUE privileges on the queue, or both. See "Enabling a User to Perform Operations on a Secure Queue" for instructions.

    • EXECUTE privilege on any object types that the Streams administrator might need to access.

  7. Repeat all of the previous steps at each database in the environment that will use Streams.

Setting Initialization Parameters Relevant to Streams

Table 10-1 lists initialization parameters that are important for the operation, reliability, and performance of a Streams environment. Set these parameters appropriately for your Streams environment. This table specifies whether each parameter is modifiable. A modifiable initialization parameter can be modified using the ALTER SYSTEM statement while an instance is running. Some of the modifiable parameters can also be modified for a single session using the ALTER SESSION statement.

Table 10-1 Initialization Parameters Relevant to Streams

Parameter Values Description

COMPATIBLE

Default: 10.0.0

Range: 9.2.0 to Current Release Number

Modifiable?: No

This parameter specifies the release with which the Oracle server must maintain compatibility. Oracle servers with different compatibility levels can interoperate.

To use the new Streams features introduced in Oracle Database 10g Release 1, this parameter must be set to 10.1.0 or higher. To use downstream capture, this parameter must be set to 10.1.0 or higher at both the source database and the downstream database.

To use the new Streams features introduced in Oracle Database 10g Release 2, this parameter must be set to 10.2.0 or higher.

GLOBAL_NAMES

Default: false

Range: true or false

Modifiable?: Yes

Specifies whether a database link is required to have the same name as the database to which it connects.

To use Streams to share information between databases, set this parameter to true at each database that is participating in your Streams environment.

JOB_QUEUE_PROCESSES

Default: 0

Range: 0 to 1000

Modifiable?: Yes

Specifies the number of Jn job queue processes for each instance (J000 ... J999). Job queue processes handle requests created by DBMS_JOB.

This parameter must be set to at least 2 at each database that is propagating messages in your Streams environment, and should be set to the same value as the maximum number of jobs that can run simultaneously plus two.

LOG_ARCHIVE_CONFIG

Default: 'SEND, RECEIVE, NODG_CONFIG'

Range: Values:

  • SEND

  • NOSEND

  • RECEIVE

  • NORECEIVE

  • DG_CONFIG

  • NODG_CONFIG

Modifiable?: Yes

Enables or disables the sending of redo logs to remote destinations and the receipt of remote redo logs, and specifies the unique database names (DB_UNIQUE_NAME) for each database in the Data Guard configuration.

To use downstream capture and copy the redo data to the downstream database using redo transport services, specify the DB_UNIQUE_NAME of the source database and the downstream database using the DG_CONFIG attribute.

LOG_ARCHIVE_DEST_n

Default: None

Range: None

Modifiable?: Yes

Defines up to ten log archive destinations, where n is 1, 2, 3, ... 10.

To use downstream capture and copy the redo data to the downstream database using redo transport services, at least one log archive destination must be at the site running the downstream capture process.

LOG_ARCHIVE_DEST_STATE_n

Default: enable

Range: One of the following:

  • alternate

  • reset

  • defer

  • enable

Modifiable?: Yes

Specifies the availability state of the corresponding destination. The parameter suffix (1 through 10) specifies one of the ten corresponding LOG_ARCHIVE_DEST_n destination parameters.

To use downstream capture and copy the redo data to the downstream database using redo transport services, make sure the destination that corresponds to the LOG_ARCHIVE_DEST_n destination for the downstream database is set to enable.

OPEN_LINKS

Default: 4

Range: 0 to 255

Modifiable?: No

Specifies the maximum number of concurrent open connections to remote databases in one session. These connections include database links, as well as external procedures and cartridges, each of which uses a separate process.

In a Streams environment, make sure this parameter is set to the default value of 4 or higher.

PARALLEL_MAX_SERVERS

Default: Derived automatically

Range: 0 to 3599

Modifiable?: Yes

Specifies the maximum number of parallel execution processes and parallel recovery processes for an instance. As demand increases, Oracle will increase the number of processes from the number created at instance startup up to this value.

In a Streams environment, each capture process and apply process can use multiple parallel execution servers. Set this initialization parameter to an appropriate value to ensure that there are enough parallel execution servers.

PROCESSES

Default: 40 to operating system-dependent

Range: 6 to operating system-dependent

Modifiable?: No

Specifies the maximum number of operating system user processes that can simultaneously connect to Oracle.

Make sure the value of this parameter allows for all background processes, such as locks, job queue processes, and parallel execution processes. In Streams, capture processes and apply processes use background processes and parallel execution processes, and propagation jobs use job queue processes.

SESSIONS

Default: Derived from:

(1.1 * PROCESSES) + 5

Range: 1 to 231

Modifiable?: No

Specifies the maximum number of sessions that can be created in the system.

To run one or more capture processes or apply processes in a database, you might need to increase the size of this parameter. Each background process in a database requires a session.

SGA_MAX_SIZE

Default: Initial size of SGA at startup

Range: 0 to operating system-dependent

Modifiable?: No

Specifies the maximum size of SGA for the lifetime of a database instance.

To run multiple capture processes on a single database, you might need to increase the size of this parameter.

SGA_TARGET

Default: 0 (SGA autotuning is disabled)

Range: 64 to operating system-dependent

Modifiable?: Yes

Specifies the total size of all System Global Area (SGA) components.

If this parameter is set to a nonzero value, then the size of the Streams pool is managed by Automatic Shared Memory Management.

Oracle recommends enabling the autotuning of the various pools within the SGA by setting SGA_TARGET to a large nonzero value and setting STREAMS_POOL_SIZE to 0. When SGA_TARGET and STREAMS_POOL_SIZE are set in this way, Oracle automatically tunes the SGA and the Streams pool size to meet the workload requirements.

SHARED_POOL_SIZE

Default:

If SGA_TARGET is set: If the parameter is not specified, then the default is 0 (internally determined by the Oracle Database). If the parameter is specified, then the user-specified value indicates a minimum value for the memory pool.

If SGA_TARGET is not set (32-bit platforms): 32 MB, rounded up to the nearest granule size

If SGA_TARGET is not set (64-bit platforms): 84 MB, rounded up to the nearest granule size

Range: The granule size to operating system-dependent

Modifiable?: Yes

Specifies (in bytes) the size of the shared pool. The shared pool contains shared cursors, stored procedures, control structures, and other structures.

If the SGA_TARGET and STREAMS_POOL_SIZE initialization parameters are set to zero, then Streams transfers an amount equal to 10% of the shared pool from the buffer cache to the Streams pool.

STREAMS_POOL_SIZE

Default: 0

Range:

Minimum: 0

Maximum: operating system-dependent

Modifiable?: Yes

Specifies (in bytes) the size of the Streams pool. The Streams pool contains buffered queue messages. In addition, the Streams pool is used for internal communications during parallel capture and apply.

If the SGA_TARGET initialization parameter is set to a nonzero value, then the Streams pool size is set by Automatic Shared memory management, and STREAMS_POOL_SIZE specifies the minimum size.

This parameter is modifiable. If this parameter is reduced to zero when an instance is running, then Streams processes and jobs will not run.

You should increase the size of the Streams pool for each of the following factors:

  • 10 MB for each capture process parallelism

  • 10 MB or more for each buffered queue. The buffered queue is where the logical change records (LCRs) are stored.

  • 1 MB for each apply process parallelism

For example, if parallelism is set to 3 for a capture process, then increase the Streams pool by 30 MB. If a database has two buffered queues, then increase the Streams pool by 20 MB or more. If parallelism is set to 5 for an apply process, then increase the Streams pool by 5 MB.

You can use the V$STREAMS_POOL_ADVICE dynamic performance view to determine an appropriate setting for this parameter.

See Also: "Streams Pool"

TIMED_STATISTICS

Default:

If STATISTICS_LEVEL is set to TYPICAL or ALL, then true

If STATISTICS_LEVEL is set to BASIC, then false

The default for STATISTICS_LEVEL is TYPICAL.

Range: true or false

Modifiable?: Yes

Specifies whether or not statistics related to time are collected.

To collect elapsed time statistics in the dynamic performance views related to Streams, set this parameter to true. The views that include elapsed time statistics include: V$STREAMS_CAPTURE, V$STREAMS_APPLY_COORDINATOR, V$STREAMS_APPLY_READER, V$STREAMS_APPLY_SERVER.

UNDO_RETENTION

Default: 900

Range: 0 to 232-1 (max value represented by 32 bits)

Modifiable?: Yes

Specifies (in seconds) the amount of committed undo information to retain in the database.

For a database running one or more capture processes, make sure this parameter is set to specify an adequate undo retention period.

If you are running one or more capture processes and you are unsure about the proper setting, then try setting this parameter to at least 3600. If you encounter "snapshot too old" errors, then increase the setting for this parameter until these errors cease. Make sure the undo tablespace has enough space to accommodate the UNDO_RETENTION setting.


See Also:

Configuring Network Connectivity and Database Links

If you plan to use Streams to share information between databases, then configure network connectivity and database links between these databases: