Oracle® Database

1 Reviewing Information About this Guide

This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:

• Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.

• Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.

• Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types.

This guide does not describe how to install the Custom installation type.

Where to Get Additional Installation Information

For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for Solaris Operating System (x86-64).

This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

2 Logging In to the System as root

Before you install Oracle Database Client, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

• If you are installing the software from an X Window System workstation or X terminal, then:

  1. Start a local terminal session, for example, an X terminal (xterm).

  2. If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

     $ xhost fully_qualified_remote_host_name
     
     

     For example:

     $ xhost somehost.us.acme.com
     
     

  3. If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

     $ telnet fully_qualified_remote_host_name
     
     

  4. If you are not logged in as the root user, then enter the following command to switch user to root:

     $ su - root
     password:
     #
     
     

• If you are installing the software from a PC or other system with X server software installed, then:

  Note:

  If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.

  1. Start the X server software.

  2. Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

  3. Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

  4. If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

     $ su - root
     password:
     #
     

3 Checking the Hardware Requirements

The system must meet the following minimum hardware requirements:

• 512 MB of physical RAM

• The following table describes the relationship between installed RAM and the configured swap space requirement.

  RAM	Swap Space Required
  Up to 512 MB	2 times the size of RAM
  Between 257 MB and 512 MB	2 times the size of RAM
  Between 513 MB and 726 MB	1.5 times the size of RAM
  More than 726 MB	0.75 times the size of RAM

  
  

• The minimum client install TMP space required is 115 MB. The minimum disk space requirement in the /tmp directory depends on the installation type you have selected. The following table lists the minimum disk space requirements for the /tmp directory in each type of installation.

  Client Installation Type	Disk Space Required for the /tmp Directory (MB)
  Admin	850
  Runtime	470
  Custom (all components selected)	780
  Instant	150

  
  

• Between 34 MB and 1.9 GB of disk space for the Oracle software, depending on the installation type

To ensure that the system meets these requirements:

1. To determine the physical RAM size, enter the following command:

   # /usr/sbin/prtconf | grep "Memory size"
   
   

   If the size of the physical RAM is less than the required size, then you must install more memory before continuing.

2. To determine the size of the configured swap space, enter the following command:

   # /usr/sbin/swap -s
   
   

   If necessary, refer to the operating system documentation for information about how to configure additional swap space.

3. To determine the amount of disk space available in the /tmp directory, enter the following command:

   # df -h /tmp
   
   

   If there is less than 400 MB of free disk space available in the /tmp directory, then complete one of the following steps:

   • Delete unnecessary files from the /tmp directory to meet the disk space requirement.

   • Set the TMP and TMPDIR environment variables when setting the oracle user's environment (described later).

   • Extend the file system that contains the /tmp directory. If necessary, contact your system administrator for information about extending file systems.

4. To determine the amount of free disk space on the system, enter the following command:

   # df -h
   
   

   The following table shows the approximate disk space requirements for software files for each installation type:

   Installation Type	Requirement for Software Files
   Instant Client	110 MB
   Administrator	1.2 GB
   Runtime	800 MB
   Custom (maximum)	1.6 GB

   
   

   Note:

   If you want to configure only the Instant Client Light component of Instant Client, you need 34 MB of disk space to store the related files.

5. To determine whether the system architecture can run the software, enter the following command:

   # /bin/isainfo -kv
   

   Note:

   The following is the expected output of this command:

   64-bit amd64 kernel modules

   If you do not see the expected output, then you cannot install the software on this system.

4 Checking the Software Requirements

The system must meet the following minimum software requirements.

• The operating systems is Solaris 10

• The following packages are required for this installation:

  • SUNWarc

  • SUNWbtool

  • SUNWhea

  • SUNWlibm

  • SUNWlibms

  • SUNWsprot

  • SUNWtoo

  • SUNWi1of

  • SUNWi1cs

  • SUNWi15cs

  • SUNWxwfnt

    Note: You may also require additional font packages for Java, depending on your locale. Refer to the following Web site for more information:

    http://java.sun.com/j2se/1.4.2/font-requirements.html
    
    

• PL/SQL native compilation, Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK), GNU Compiler Collection (GCC):

  • Sun ONE Studio 10 (C and C++ 5.5)

  • gcc 3.4.2

• Pro*FORTRAN:

  • Fortran 95

• Oracle JDBC/OCI Drivers:

  You can use the following optional JDK versions with the Oracle JDBC/OCI drivers, however they are not required for the installation:

  • Sun Java 2 SDK Standard Edition 1.2.2_17 and the JNDI extension

  • Sun Java 2 SDK Standard Edition 1.3.1_11 and the JNDI extension

  Note: JDK 1.4.2_08 is installed with this release.

To ensure that the system meets these requirements:

1. To determine which version of Solaris is installed, enter the following command:

   # uname -r
   
   

   If necessary, refer to your operating system documentation for information about upgrading the operating system.

2. To determine whether the required packages are installed, enter a command similar to the following:

   # pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot \
    SUNWsprox SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt
   
   

   If a package is not installed, then install it. Refer to your operating system or software documentation for information about installing packages.

In addition, you need to verify that the following patches are installed on the system. The procedure following the table describes how to check these requirements.

• For all installations on Solaris x86-64, the following operating system patches are required:

  • 118345-03: SunOS 5.10_x86: ld Patch

  • 119961-01: SunOS 5.10_x86, x64, Patch for assembler

• For PL/SQL native compilation, Pro*C/C++, Pro*FORTRAN, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK), the following C and C++ patches:

  • 117837-05: C++ compiler optimizer patch

  • 117846-08: C++ compiler Optimization patch

  • 118682-01: Patch for SS10_x86 debuginfo handling

To ensure that the system meets these requirements:

1. To determine whether an operating system patch is installed, enter a command similar to the following:

   # /usr/sbin/patchadd -p | grep patch_number(without version number)
   
   

   For example, to determine if any version of the 111713 patch is installed, use the following command:

   # /usr/sbin/patchadd -p | grep 111713
   
   

   If an operating system patch is not installed, then download it from the following Web site and install it:

   http://sunsolve.sun.com
   
   

5 Creating Required Operating System Group and User

The following local operating system group and user must exist on the system:

• The Oracle Inventory group (oinstall)

• The Oracle software owner (oracle)

To determine if this group and user already exist, and if required, to create them, follow these steps:

1. To determine if the oinstall group exists, enter the following command:

   # more /var/opt/oracle/oraInst.loc
   
   

   If the oraInst.loc file exists, then the output from this command is similar to the following:

   inventory_loc=/u01/app/oracle/oraInventory
   inst_group=oinstall
   
   

   The inst_group parameter shows the name of the Oracle Inventory group (oinstall).

2. If necessary, enter the following command to create the oinstall group:

   # /usr/sbin/groupadd oinstall
   
   

3. To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

   # id -a oracle
   
   

   If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group:

   uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
   
   

4. If necessary, complete one of the following actions:

   • If the oracle user exists, but its primary group is not oinstall, then enter a command similar to the following, where the -g option specifies oinstall as the primary group and the -G option specifies any existing groups to which the oracle user belongs:

     # /usr/sbin/usermod -g oinstall -G dba oracle
     
     

   • If the oracle user does not exist, then enter the following command to create it:

     # /usr/sbin/useradd -g oinstall [-G dba] oracle
     
     

     This command creates the oracle user and specifies:

     • oinstall as the primary group

     • dba as an optional secondary group

5. Enter the following command to set the password of the oracle user:

   # passwd -r files oracle
   

6 Creating an Oracle Base Directory

Create an Oracle base directory with a name similar to the following, and specify the correct owner, group, and permissions for it:

/u01/app/oracle

The Optimal Flexible Architecture (OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:

/mount_point/app/oracle_sw_owner

To determine where to create this directory:

1. Enter the following command to display information about all mounted file systems:

   # df -k
   
   

   This command displays information about all of the file systems mounted on the system, including:

   • The physical device name

   • The total amount, used amount, and available amount of disk space

   • The mount point directory for that file system

2. From the display, identify a file system that has sufficient disk space.

3. Note the name of the mount point directory for the file system that you identified.

To create the required directory and specify the correct owner, group, and permissions for it, follow these steps:

1. Enter the following command to create subdirectories in the mount point directory that you identified for the Oracle base directory:

   # mkdir -p /u01/app/oracle
   
   

2. Change the owner and group of the directory that you created to the oracle user and the oinstall group:

   # chown -R oracle:oinstall /u01/app/oracle
   
   

3. Change the permissions on the directory that you created to 775:

   # chmod -R 775 /u01/app/oracle
   
   

4. When you configure the oracle user's environment later during the installation, set the ORACLE_BASE environment variable to specify the Oracle base directory that you have created.

7 Configuring the oracle User's Environment

You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

• Set the default file mode creation mask (umask) to 022 in the shell startup file.

• Set the DISPLAY environment variable.

To set the oracle user's environment:

1. Start a new terminal session, for example, an X terminal (xterm).

2. Enter the following command to ensure that X Window applications can display on this system:

   $ xhost fully_qualified_remote_host_name
   
   

3. Complete one of the following steps:

   • If the terminal session is not connected to the system where you want to install the software, then log in to that system as the oracle user.

   • If the terminal session is connected to the system where you want to install the software, then switch user to oracle:

     $ su - oracle
     
     

4. To determine the default shell for the oracle user, enter the following command:

   $ echo $SHELL
   
   

5. Open the oracle user's shell startup file in any text editor:

   • C shell (csh or tcsh):

     % vi .login
     
     

6. Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:

   umask 022
   
   

7. If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.

8. Save the file, and exit from the editor.

9. To run the shell startup script, enter the following command:

   • Bash shell:

     $ . ./.bash_profile
     
     

   • Bourne or Korn shell:

     $ . ./.profile
     
     

   • C shell:

     % source ./.login
     
     

10. If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:

    • Bourne, Bash, or Korn shell:

      $ DISPLAY=local_host:0.0 ; export DISPLAY
      
      

    • C shell:

      % setenv DISPLAY local_host:0.0
      
      

    In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).

11. Enter commands similar to the following to set the ORACLE_BASE environment variable:

    • Bourne, Bash, or Korn shell:

      $ ORACLE_BASE=/u01/app/oracle
      $ export ORACLE_BASE
      
      

    • C shell:

      % setenv ORACLE_BASE /u01/app/oracle
      
      

    In these examples, /u01/app/oracle is the Oracle base directory that you created earlier.

12. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

    • Bourne, Bash, or Korn shell:

      $ unset ORACLE_HOME
      $ unset TNS_ADMIN
      
      

    • C shell:

      % unsetenv ORACLE_HOME
      % unsetenv TNS_ADMIN
      
      

13. To verify that the environment has been set correctly, enter the following commands:

    $ umask
    $ env | more
    
    

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

8 Mounting the Product Disc

On most Solaris x86-64 systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, follow these steps to mount it:

1. Switch user to root:

   $ su - root
   
   

2. If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:

   # eject
   
   

3. Insert the disc into the disc drive.

4. To verify that the disc mounted automatically, enter a command similar to the following:

   $ ls /dvd/dvd0
   
   

5. If this command fails to display the contents of the disc, then enter a command similar to the following:

   # /usr/sbin/mount -r -F hsfs /dev/dsk/cxtydzs2 /dvd
   
   

   In this example, /dvd is the disc mount point directory and /dev/dsk/cxtydzs2 is the device name for the disc device, for example /dev/dsk/c0t6d0s2.

6. If Oracle Universal Installer is displaying the Disk Location dialog box, enter the disc mount point directory path, for example:

   • Disc mounted automatically:

     /dvd/dvd0
     
     

   • Disc mounted manually:

     /dvd
     

9 Installing Oracle Database Client

After configuring the oracle user's environment, start Oracle Universal Installer and install the Oracle software as follows:

1. To start Oracle Universal Installer, complete one of the following steps depending on the location of the installation files:

   • If the installation files are on disc, enter commands similar to the following, where directory_path is the path of the db directory on the DVD:

     $ cd /tmp
     $ /directory_path/runInstaller 
     
     

   • If the installation files are on the hard disk, change directory to the db directory and enter the following command:

     $ ./runInstaller
     
     

   If Oracle Universal Installer does not start, then refer to Oracle Database Client Installation Guide for Solaris Operating System (x86-64) for information about how to troubleshoot X display problems.

2. The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

   • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

   • If you encounter errors while installing or linking the software, then refer to Oracle Database Client Installation Guide for Solaris Operating System (x86-64) for information about troubleshooting.

   Note:

   If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.

   Screen	Recommended Action
   Select Installation Method	The Basic Installation option is selected by default. Specify the directory path of the Oracle home. Ensure that the UNIX DBA group oinstall is selected. If you want to create a starter database, then specify a name and password for it. Then, click Next.
   Specify Inventory Directory and Credentials	This screen is displayed only during the first installation of Oracle products on a system. Specify the full path of the Oracle Inventory directory. Ensure that the operating system group selected is oinstall. Then, click Next.
   Product-Specific Prerequisite Checks	Verify that all of the prerequisite checks succeed, then click Next. Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, all of the checks should pass. If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.
   Summary	Review the information displayed on this screen, and then click Install.
   Install	This screen displays status information while the product is being installed.
   Configuration Assistants	This screen displays status information for the configuration assistants that configure the software and create a database. When the message is displayed at the end of this process, click OK to continue.
   Execute Configuration Scripts	When prompted, read the instructions and then run the scripts mentioned on this screen. Click OK to continue.
   End of Installation	The configuration assistants configure several Web-based applications, including Oracle Enterprise Manager Database Control. This screen displays the URLs configured for these applications. Make a note of the URLs used. The port numbers used in these URLs are also recorded in the following file: oracle_home/install/portlist.ini To exit from Oracle Universal Installer, click Exit and then click Yes.

   
   

10 What to Do Next?

After you have successfully installed Oracle Client, refer to Oracle Database Client Installation Guide for Solaris Operating System (x86-64) for information about required and optional postnstallation steps.

11 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at

http://www.oracle.com/accessibility/

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

TTY Access to Oracle Support Services

Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.