| Oracle® Secure Backup Readme Release 10.1.0.2 Part Number B32120-04 |
|
| PDF · Mobi · ePub |
| Oracle® Secure Backup Readme Release 10.1.0.2 Part Number B32120-04 |
|
| PDF · Mobi · ePub |
Readme
Release 10.1.0.2
B32120-04
January 2007
This Readme document applies only to Oracle Secure Backup Release 10.1.0.2. This Readme documents licensing, supported platforms and devices as well as known and fixed issues.
For documentation, use your Web browser to access the Oracle Secure Backup documentation library. The library home page is named index.htm and is located in the doc directory of your CD-ROM image. You can also access the library online at the following URL:
http://www.oracle.com/technology/documentation/
Section 1, "CD-ROM Image Contents"
Section 2, "Release Components"
Section 3, "Licensing Information"
Section 4, "Upgrading Existing Oracle Secure Backup Installations to 10.1.0.2"
Section 5, "Outstanding Bugs and Known Issues"
Section 6, "Bugs Fixed in Release 10.1.0.2"
Section 7, "Supported Tape Devices and Platforms"
Section 8, "Documentation Accessibility"
The CD-ROM image for each platform contains all necessary tools, documentation, and software to install and operate Oracle Secure Backup on the selected platform.
Note:
Each supported platform requires its own separate CD-ROM or installation Zip file. For example, if you are running an administrative domain using both Windows and Linux clients, you require separate installation media (CD-ROM or downloaded Zip file) for Windows and for Linux.You can access the installation files from a physical CD-ROM or through a Zip file downloaded from the following product site:
http://www.oracle.com/technology/products/secure-backup/
The contents of the CD-ROM and Zip file for a given platform are identical.
The only product in this release is Oracle Secure Backup.
Refer to Oracle Secure Backup Licensing Information for licensing terms.
In an upgrade installation, the Oracle Secure Backup catalogs (contained in the admin directory) are preserved retaining configuration information and backup metadata for your administrative domain. This state information for your administrative domain, such as the backup catalog, host, user and device configuration information, and any scheduled backup jobs, is stored in the admin directory under the Oracle Secure Backup home on your administrative server.
Note:
As with any upgrade, we recommend backing up the Administrative Server prior to upgrading.Before upgrading an existing Oracle Secure Backup administrative domain to 10.1.0.2, you must shut down Oracle Secure Backup-related drivers and background processes on all hosts. Upgrade the administrative server, host first, and then the other hosts in the domain.
Brief instructions on each step are described in the following sections.
Before performing an upgrade installation, you must stop the Oracle Secure Backup-related daemons and services on all hosts in your administrative domain.
On Linux or Unix, use the ps command to identify the Oracle Secure Backup daemon processes:
# /bin/ps -ef | grep ob
Use the kill -9 command to stop each process.
On Windows hosts, you must stop the Oracle Secure Backup Services service, and, on media servers, disable the Oracle Secure Backup device driver.
To disable the driver, in Device Manger, under Tape Drives, right-click Oracle Secure Backup Device Driver, and select Disable. Then reboot the system.
To stop the Oracle Secure Backup Services service, open the Services applet, right-click the Oracle Secure Backup Services service, and select Stop.
To upgrade a Windows installation of Oracle Secure Backup, follow the Windows installation process described in Oracle Secure Backup Installation Guide.
Before the new version of Oracle Secure Backup can be installed, the previous version must be uninstalled. When the installer detects the existing install of Oracle Secure Backup, it runs the uninstaller program for the previous version automatically, before beginning the new installation.
Note:
On a Windows administrative server, the uninstallation program displays the following prompt:This system was configured as an Oracle Secure Backup Administrative Server. Oracle Secure Backup creates files specific to this administrative domain in the "admin" directory. Would you like to keep these files in case you reinstall Oracle Secure Backup? If you choose "Delete" all files related to Oracle Secure Backup will be removed from this system. If you choose "Keep" the files specific to this administrative domain will be retained.
Click Keep to retain the files in the admin directory. The new installation of Oracle Secure Backup uses these files to keep the configuration of your administrative domain.
Complete the rest of the installation process as described in Oracle Secure Backup Installation Guide.
Note:
Specify the same host roles for each host as were used in the previous installation.To upgrade a Linux or Unix installation of Oracle Secure Backup, follow the setup and installation process described in Oracle Secure Backup Installation Guide.
During the upgrade process, the installer displays the following prompt:
Oracle Secure Backup is already installed on this machine (myhostname-sun2). Would you like to re-install it preserving current configuration data[no]?
Enter yes to perform the upgrade installation, retaining your previous configuration.
The following sections describe outstanding bugs and known issues with Oracle Secure Backup.
On Windows Server 2003 and Windows 2000, on hosts that are only configured for the media server or client roles, the Oracle Secure Backup Services service is not started automatically after installation. You must start it manually.
Note:
This issue does not apply to Windows XP.
This issue does not apply to hosts configured for the administrative server role.
This issue only occurs immediately after the installation. The service is started automatically whenever Windows is rebooted.
To start the Oracle Secure Backup Services service, open the Services applet, right-click the Oracle Secure Backup Services service, and select Start.
On Windows administrative servers, if the title for a backup job contains upper case characters, email notification of the backup job summary fails.
On SUSE Linux, permissions for the Generic SCSI device files /dev/sg0 -/dev/sg31 and /dev/sga - /dev/sgp must be changed from 640 to 666 for Oracle Secure Backup to operate properly.
The Preferred Network Interface (PNI) capability supports bidirectional specification of communication between hosts. The PNI behavior is described below.
In cases where hosts have more than one network interface, you can specify which interface is used to transmit data to be backed up or restored between hosts by configuring Preferred Network Interface (PNI) settings for each host.
Configuring host A to specify a Preferred Network Interface on host B identifies the network interface on host B to use when host A and host B communicate.
When host A attempts to establish a connection with host B, the PNI settings on host A and host B are applied in the following manner:
Host A queries the administrative server for the PNI settings configured for host B, to see if a specific interface on host B should be used for transfers from host A. If an interface at host B is specified for communications with host A, then it is used for the transfer.
Host A also queries the administrative server for the PNI settings configured for host A, to see if a specific interface is preferred for transfers to host B. If an interface at host A is specified for communications with host B, then it is used for the transfer.
For example, suppose the host storabck10 has the following PNI setting configured:
ob> lspnistorabck10:
PNI 1:
interface: storabck10-rac
clients: stacx53
When the host stacx53 connects to storabck10, it consults the configured PNI settings and determines that it must connect over the interface on storabck10 named storabck10-rac.
Now suppose that storabck10, acting as a client, wants to connect to a device connected to stacx53 (that is, stacx53 is now acting as a media server). storabck10 also references the PNI settings for both hosts, and discovers that it should use the local interface storabck10-rac in order to establish the connection with stacx53.
The obtar command reports which interfaces are in use for a connection between obtar and a remote backup device. To display this information in the obtar transcript, use the -J option on the obtar command line, or as part of the backupoptions policy. In the example above, the connection would be shown as:
09:38:38 A_O: sock 8 connects (local) storabck10.rac to (remote) stacx53
The following globalization restrictions apply to Oracle Secure Backup:
The Oracle Secure Backup Web Tool and command line interface are English-only, and are not globalized. Localizations or multi-byte character set data are not supported. All messages and documentation are in English.
Oracle Secure Backup does not support filenames or RMAN Backup names that are encoded in character sets that do not support null termination, such as Universal Character Set (UCS).
On a Linux host running Enterprise Manager Database Control or Enterprise Manager Grid Control, support for managing Oracle Secure Backup is not included until you apply the first Oracle Database 10g Release 2 patch set.
Also, in releases 10.2.0.1 and 10.2.0.2 of Enterprise Manager Grid Control and release 10.2.0.2 of Enterprise Manager Database Control, the Oracle Secure Backup section of the Maintenance page is not displayed by default.
Follow the steps in the section "Using Enterprise Manager" in the "Getting Started" chapter of Oracle Secure Backup Administrator's Guide to configure Enterprise Manager to include the Oracle Secure Backup section in the Maintenance page.
The clocks on the administrative server, clients and media servers must be synchronized to within 60 minutes of each other. If the time skew among hosts in the administrative domain is more that 60 minutes, then you may encounter problems when attempting to issue the mkhost command to configure new hosts. The error that appears in the observiced log file on the client or media server is "failed to validate certificate".
The solution is to synchronize the clock on all hosts in the administrative domain to match the clock on the administrative server, and then retry the failed operation.
You cannot edit the RMAN-DEFAULT media family when using Enterprise Manager.
Use the Oracle Secure Backup Web tool or obtool to edit the RMAN-DEFAULT media family.
Configuring a Linux host for the Oracle Secure Backup media server role requires that the SCSI Generic driver be installed on that host. The host must also be configured to automatically reload the driver after a reboot.
Kernel modules are usually loaded directly by the facility that requires them, if the correct settings are present in the /etc/modprobe.conf file. However, it is sometimes necessary to explicitly force the loading of a module at boot time.
For example, on RedHat Enterprise Linux, the module for the SCSI Generic driver is named sg. Red Hat Enterprise Linux checks for the existence of the /etc/rc.modules file at boot time, which contains various commands to load modules.
Note:
Therc.modules should be used, and not rc.local, because rc.modules is executed earlier in the boot process.The following commands can be used to add the sg module to the list of modules configured to load as root at boot time:
# echo modprobe sg >> /etc/rc.modules # chmod +x /etc/rc.modules
On Windows platforms, when the securecomms security policy is enabled (the default setting), you must be logged in as Administrator (or your logged-in account must belong to the Administrators group) in order to run the Oracle Secure Backup obtool command line tool.
If you configure the media server role on a Windows 2000 host with no attached media devices, then the operating system will continuously try to load the Oracle Secure Backup driver. Continuously trying to load the driver uses most of the available CPU cycles on that system, and renders the system unusable.
Microsoft has provided a hotfix which should be applied to any Windows 2000 host configured for the media server role. For a description of the Windows 2000 issue that causes this problem and the hotfix that resolves it, refer to the following URL:
http://support.microsoft.com/default.aspx?kbid=841382
To avoid this issue, when there are no media devices attached to a Windows 2000 host, do not configure that host for the media server role.
The default configuration of the Windows Firewall in Windows XP can block ports used by Windows hosts running Oracle Secure Backup. This can prevent Windows hosts from connecting to other hosts in the administrative domain.
Instructions for configuring the Windows Firewall to not interfere with Oracle Secure Backup are contained in the Oracle Secure Backup Installation Guide.
When uninstalling Oracle Secure Backup on a Windows administrative server, the uninstaller allows you to click Keep, to keep files containing the record of your administrative domain and backups for use by a future installation of Oracle Secure Backup, or Delete, to delete these files and create a new administrative domain in a future installation.
However, the release 10.1.0.1 uninstaller does not correctly preserve these files. Running the installer from release 10.1.0.1 deletes the administrative domain configuration, even if you choose Keep.
To upgrade an installation of release 10.1.0.1 and preserve the configuration of the administrative domain, run the installation program for release 10.1.0.2. Do not uninstall release 10.1.0.1 first. The installer for 10.1.0.2 upgrades an existing installation of release 10.1.0.1 transparently, and preserves the administrative domain configuration.
If you run the installer for Oracle Secure Backup release 10.1.0.2 on Windows on a system with release 10.1.0.2 already installed, the installer displays the Modify, Repair and Remove options. Only the Remove option is correctly supported in release 10.1.0.2. Do not use the Modify or Repair options in the installer when installing in place over an existing 10.1.0.2 installation.
When upgrading an existing Windows 64-bit installation of Oracle Secure Backup release 10.1.0.0.0 to release 10.1.0.2, you must uninstall release 10.1.0.0.0 before you can run the installer for release 10.1.0.2.
However, the Microsoft Installer reports an internal error, if the file %WINDIR%\system32\orasbt.dll is present when you run the Windows installer for Oracle Secure Backup release 10.1.0.2. Therefore, delete this file manually before running the installer for Oracle Secure Backup release 10.1.0.2.
The following bugs have been addressed in Oracle Secure Backup Release 10.1.0.2:
| Bug Number | Description |
|---|---|
|
4878473 |
Very Long Volume IDs Became Corrupted When a volume ID of 25 or more characters is used, the last six characters are required to be numeric. Previous versions of Oracle Secure Backup did not correctly enforce this requirement and generated Volume IDs that did not end with numeric characters. Oracle Secure Backup now replaces the last six characters of long volume IDs with numeric characters. |
|
5228264 |
"Device Already Opened By This Process" Error When testing whether a locally attached tape device was already in use, Oracle Secure Backup compared the SCSI channel, SCSI ID and SCSI LUN but did not compare the addresses of the SCSI adapters. This meant that a process could not simultaneously open two tape devices whose addresses differed only on adapter address. As a result, backups or other operations failed with a "Device already opened by this process" error if two media devices on different SCSI adapters had the same SCSI channel, SCSI ID and SCSI LUN values. |
|
5389348 |
Windows 2000 Client Host Database Backup Fails with Repeated Warning "unsupported message 0.0 received" A database backup from a Windows 2000 client could fail with repeated error messages sent to RMAN. The communication between RMAN and the Windows 2000 client was handled incorrectly, and caused repeated zero-length messages to be sent. In this case, the RMAN database backups no longer fail in this manner. |
|
5370286 |
"Page Not Found" Errors in Web Tool After Login Selecting a user password that was a multiple of eight characters long would make the Web tool inaccessible. |
|
5221340 |
Can Only Use Lower-Case Letters in Host Names on Windows Administrative Servers Windows administrative servers now support upper-case letters in host names. |
|
5211979 |
Tape Device Debug Logging Can Cause Backup Failures Restriction on enabling tape device-related debug logging has been removed. |
|
5207935 |
RMAN Backup Failed with RMAN-00600 Error An RMAN database backup could fail when a file system backup job was started by the scheduler during a long-running backup job. This failure no longer occurs. |
|
4398115 |
Restriction on Number of Hosts and Tape Drives with Windows Administrative Servers The previous limitation on the maximum number of hosts and tape drives supported when using a Windows host as administrative server has been removed. |
|
5149059 |
Restart Windows Media Servers and Clients When Changing Policy Parameters It is no longer necessary to restart Windows media servers when changing policy parameters. |
|
5040299 |
Database Backup Jobs Fail If Tape Device Becomes Temporarily Unavailable During Backup If the device becomes available again within the user-configured RMAN resource wait time, then the database backup job will now continue when the tape device becomes available again. |
|
5016065 |
Backup of Oracle Sparse Files Fails if Exclude Oracle Files Option is Specified The backup of a database sparse file of size greater than 2GB now succeeds on Linux when the backup excludes database temporary files. |
|
4924506 |
Device Restrictions Cannot Be Removed Via Web Browser Web tool can now remove device restrictions |
|
4736477 |
Obtool LSBU Command Not Handling '\' in Path Obtool now supports the backslash character |
|
5353546 |
Administrative Server Role Not Supported on Non-English Windows Installations Oracle Secure Backup can now be successfully configured as an administrative server on supported non-English versions of Windows. Previous limitations have been removed. |
Supported platforms, web browsers and NAS are listed on Certify on Metalink, at the following URL:
Tape drive and library matrixes are available at the following URL:
Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at
http://www.oracle.com/accessibility/
Accessibility of Code Examples in Documentation
Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.
Accessibility of Links to External Web Sites in Documentation
This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.
TTY Access to Oracle Support Services
Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.
Oracle Secure Backup Readme, Release 10.1.0.2
B32120-04
Copyright © 2007, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.
If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065
The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.
 Copyright © 2007, Oracle. All rights reserved. Legal Notices |
|